Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
There may be a remote risk of electric shock from lightning. 13. Do not use the telephone to report a gas leak in the vicinity of the leak. SAVE THESE INSTRUCTIONS Included accessories Handset...............one Card holder with memory station card ............one Telephone line cord......one Handset cord...........one -2- Thank you for purchasing the Panasonic Telephone. Table of Contents Important safety instructions ... 1 Connection ..................3 Initial setting..................4 Location of controls . ... .. 5 Using overlay ... .... . 7 Installing the card holder ..............8 Wall mounting ... ... 9 Important information ... .... 10 Accessory order information Back cover Connection Connect as shown >p.-niu л,Л SIAU 4 ШШЁШч To the EMSS control unit -3- Initial setting HANDSET VOLUME Selector: To adjust the volume level of the handset. NORMAL: Normal voice HIGH: Loud voice RINGER VOLUME Selector: To adjust the volume level of the ringer. HIGH: Loud ringer LOW: Low ringer OFF: No ringer VOLUME Control: To adjust the volume level of the speaker volume. MAX: Loud voice MIN: Low voice r CD rrffl o *£*••• 10* HANDSET ••iCADSfT SET*»PAOG*Uy 7 MEMORY Switch: Set to “SET”. For station programming, set to “PROGRAM’ HANDSET/HEADSET Selector: Set to “HANDSET”. For connecting the headset, set to “HEADSET”. CONTRAST Selector: To adjust the brightness of the LCD display. In the low position the Back Light is off. -4- Location of controls ГГ Panasonic _WVTWíD d> ®- JT °T T 1 ABC 2 GHI4 jkl5 PRS7 tuv8 OPERO def3 MN06 wxy9 Œ 3 m=h 43>. J -© The KX-T7135 is intended for use on the Panasonic KX-TA624-2 Advanced Hybrid System. It is also suitable for use on the Panasonic KX-TD series Digital Super Hybrid Systems. — 5 - © INTERCOM Button and Indicator: Used for making or receiving an intercom call. ©CONFERENCE Button and Indicator: Used for speaking with three parties at the same time. (3) REDIAL Button: Redials the last number dialed. 0 FLASH Button: Used for sending the hook flash signal to the CO line. (5) LCD (Liquid Crystal Display) with back light. (6) Programmable Feature Buttons: Dial or access the system features with one touch. (7) Flexible CO Line Buttons and Indicators*: Used for dialing via CO line, Direct Station Selection, or Programmable Feature buttons. (§) Flexible Message Waiting Button and Indicator*: Used for Message Waiting, Direct Station Selection, or Programmable Feature button. ©SAVE Button: Used for temporarily storing the number in the redial memory. ©TRANSFER Button: Transfers a call to any extension. (0) PAUSE Button: Inserts a pause between the access number and the phone number. ©AUTO DIAUSTORE Button and Indicator: Used for dialing the system speed dialing/For storing functions into memory. ©AUTO ANSWER/MUTE Button and Indicator: Used for answering an intercom call automatically/ For muting your voice in hands-free mode. @ SP-PHONE Button and Indicator: Used for making or receiving a call without using the handset. ©HOLD Button: Places a call on hold. © FWD/DND Button and Indicator: Sets or cancels the Call Forwarding/Do Not Disturb features. ’These functions are limited to the specified EMSS Control Units. Refer to the Installation manual. -6- Using overlay When you set the system programming data, the function of the KX-T7135 connected to your EMSS unit will change as follows. Installing the card holder 1 Line up the marks (►) on the card holder and ones on the slide rails of the unit. Push the two shaded portions slightly and insert the edges of the holder under the slide rails and then slide down toward arrow “A”. Removing the card holder: Push the card holder toward arrow “B" while keeping the tip of the holder pulled toward arrow “C”. Wall mounting This unit can be mounted on the.wall phone plate. 4 Turn the handset hook upside down. Remove the attached stand. Rotate the stand V2 turn so that the arrow on the stand shows UP for WALL. Place the stand on the center of the unit. Mount the unit on the wall phone plate. To temporarily place the handset down during a conversation, hook as shown. /-:-' Important information If there is any trouble, disconnect the unit from the extension line and connect a known working phone If the known working phone operates properly, have the defective phone repaired by one of the specified Panasonic Factory Service Centers If the known working phone does not operate properly, check the Electronic Modular Switching System and the Internal extension wiring WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE CAUTION: To assure continued compliance with FCC rules, do not make any unauthorized modifications When programming emergency numbers and/or making test calls to emergency numbers 1) Remain on the line and briefly explain to the dispatcher the reason for the call before ha...