Assessments - 2, GPA: 3
(
)
)
|
Facilidade de uso
Please read the instructions carefully before use, and keep this User Guide for future reference. For your records Date of purchase: Place of purchase: Serial number: (on base of answering machine) Purchase price: (for warranty purposes, proof of purchase is required, so please keep your receipt) Installing your Duet 450 Clock Telephone The emergency services can be contacted in the UK by dialling 999. You may also dial 112, which is valid in any country that is a member of the European Community. You may not be able to make an emergency call in certain situations: • If the telephone line is disconnected. • If there is a fault on the line from your phone or on the network. If your Duet 450 Clock Telephone is connected to a switchboard, you may have to dial an access number before 999 or 112 to contact the emergency services. Emergency calls IMPORTANT Check that your Duet 450 Clock Telephone is complete. When you unpack you must have: Telephone Handset with attached line cord. Clock Telephone base with attached mains power cable and 3-pin plug 3 3 Situate your Duet 450 Clock Telephone close enough to a phone and mains socket so that the cables will reach. Do not stand it on carpets or other similar surfaces that generate fibres. Do not cover or enclose the machine; allow a free flow of air to its surfaces. Your Duet 450 Clock Telephone is only designed to be operated in a normal office or domestic environment. It should not be used in bathrooms or near water. Warning Install backup battery Situating your phone 3 Replace the cover. Tighten the screw on the battery compartment door. Check your telephone wall socket If you do not have a modern style socket, call Freefone 0800 800 150 and ask for a BT engineer to come and fit the correct socket. This is a chargeable service. 1 A Backup battery will ensure your clock settings are retained in the event of a mains power failure. Your telephone will function as normal even when the mains power is off. Loosen the screw on the battery compartment door. included). 2 Connect and insert a 9 volt battery (not Plug the telephone cord into wall socket Set the ringer volume Plug the telephone cord into wall socket Set the ringer volume Plug the attached 3 pin plug into the mains power socket OFF LO HI The ringer volume switch is located on the side of the handset. There are three settings: HI A loud ring; your Duet 450 is preset to this position. LOW A quiet ring. OFF no ring Your Duet 450 is now ready for use Storing and dialling numbers Storing and dialling numbers Using the Telephone 4 5 Press the STORE button. STORE Press the memory button (M1, M2 or M3) under which you want to store the number. M1 Replace the handset. The number is stored. To dial a number stored in the one- touch memory 1 To store a phone number in the one- touch memory 2 Lift the handset. Press the one-touch memory button (M1, M2 or M3) you want to dial. M1 The number is dialled automatically. 1 2 3 One touch memory label Use the label by the M1, M2 and M3 button to keep a record of the stored numbers. Your Duet 450 Clock Telephone has three one-touch memory buttons M1, M2 or M3. You can store a further 10 telephone numbers in the two-touch Quickdial memory. Each stored number can be up to 16 digits long. Lift the handset. Press the STORE button. STORE Dial the number you want to store using the keypad. To store phone numbers in the Quickdial memory 1 2 3 4 5 Lift the handset. Press the STORE button. STORE Dial the number you want to store using the keypad. Press the STORE button. STORE Press the keypad button (0-9) under which you want to store the number. JKL5 Replace the handset. The number is stored. To dial numbers longer than 16 digits To store a pause To dial a number stored in the Quickdial memory To dial numbers longer than 16 digits To store a pause To dial a number stored in the Quickdial memory 1 2 Lift the handset. Press the QUICKDIAL button. QUICKDIAL 3 Press the 0-9 location under which the number you require is stored. JKL5 The phone number is dialled automatically. Storing numbers longer than 16 digits Telephone numbers longer than 16 digits can be stored by entering the first 16 digits in one memory location, then storing the remaining digits under a second memory location. 1 2 Lift the handset. Dial the first 16 digits by pressing the M1, M2, M3 or Quickdial button under which the second part of the number is stored. The whole number is stored automatically. To redial a number 1 2 Lift the handset. Press the REDIAL button. REDIAL The last number called is redialled automatically. 1 2 Some switchboards can take a short time to pick up an outside line. You can insert a pause as required to allow for this delay. Press the REDIAL button at the required point when storing a number. The pause is stored in the memory. REDIAL When dialling normally, pressing the REDIAL button will enter a pause in the number Using the R (Recall) button Using the Secrecy button Using the R (Recall) button Us...