4 Important Safety Instructions ............................... pg. 4-6 Location of Controls ............................................... pg. 7-9 Keys Descriptions ....................................................pg. 10 Installation Steps ..............................................pg. 11-14 BASIC TELEPHONE FUNCTIONS Amplification .....................................................pg. 14-15 Ringer Setting ....................................................pg. 16-17 Visual Indicator ..

4. The LCD shows the current Remote code. Enter the new code you would like to set up and then press the OK soft key. Remote Access You can access many features of your answering machine remotely from any touch tone phone. A four-digit security Remote code is required to access the system and the factory default code is 0000. To enter remote access: 1. Dial your phone number from any touch tone phone. 2. When the Announce1/Announce2 message starts to play, you may enter the remote access mode by

NOTE: Your ClearSounds® CSC500 comes from the factory preset in the OFF position. If you would like to override the factory preset, simply change the selection on the back of the phone to ON. - Ringer Setting You can adjust the ringer of your phone as high as 85 dB. The ringer volume level can be adjusted by sliding the switch on the back side of the phone. Ringer options include HI, LO and OFF. Please Note: Your phone is also equipped with a visual flasher that automatically flashes when the ph

To change the language used for your Caller ID display: In the hook position, 1. Press the MUTE button to access the Programming Menu. 2. Using the or arrow buttons, highlight/select <>. 3. Press the OK button to confirm. 4. Using the or arrow buttons to select <>. 5. Press the OK button. 6. Using the arrow buttons to select the language you would like to set <> (for example) 7. Press the OK button. 8. Press the C button twice to exit. NOTE: Do not change the lan

Check the battery icon on the LCD to see the battery charge level. When replacing the batteries, always use good quality Ni-MH AAA re-chargeable batteries. Charging the Handset 1. Place the handset into the base. The LCD screen will light up and you will hear a beep to indicate charging has begun. 2. Important: Before initial operation, you should fully charge the handset for at least 15 hours. 3. After the batteries are fully charged, begin the registration process as described on page 9. When

It is important to instruct all potential users of its proper operation. It is advised to adjust the volume control to its minimum level (Lo) while not in use and alert other users that hearing damage can potentially result from misuse. WARNING: To avoid the possibility of electrical shock, do not use this product near water (For example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool) while in the bathtub or shower or when you are wet. If the p

Record an emergency connect SOS message The person will hear the emergency connect SOS message if the call is answered. You can record a 10 second message maximum. In the hook position, 1. Press the MUTE button. 2. Using the or arrow buttons, highlight <>. 3. Press the OK button to confirm. 4. Using the or arrow buttons, scroll to select <>. 5. Press the OK button. 6. Using the arrows button select << RECORD SOUND>>. 7. Press the OK button. 8. Record your emergency connect SO

7. Press the C button, then the LCD Screen will display <>. 8. Press C button once more to confirm. To Save Numbers From Caller ID To The Phone Book: 1. Using the or arrow buttons, find the phone number you want to save. 2. Press and Hold the OK button until the last digit of the number is flashing. 3. You can now modify the number and name (see above procedure Review/Modify Number) and save it to your Phone Book. To Dial A Number From The Phone Book: In the hook position, 1. Press the MUT

Lift the handset 2. Press PROG button (see diagram #7) 3. Press the “#” button 4. Press any of the dial keys 1 - 9 (see diagram #8) 5. The new ringer setting will be activated with the next incoming call. Your CL1100 is also equipped with a visual ringer, which flashes when the phone rings. NOTE: You may temporarily turn OFF the audible ringer by selecting the “0” key in the instructions above. An incoming call will now be indicated only by the red flashing indicator light located on the top of