Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
If you still have difficulties, instead of returning it to the dealer, check our website Atek.com for possible additional information, or contact us for friendly technical support. Telephone: 1-888-889-9990 (US and Canada only) or 714-258-0100 Monday thru Friday 9 a.m. to 5 p.m. US Pacific Time Email: support@atek.com Stagehand User’s Manual, page 2 Safety Information Safety Information ! WARNING! RISK OF SERIOUS INJURY! LASER POINTER The laser pointer in your Stagehand can cause permanent eye damage if not used properly. • Do not look into the laser beam or shine it in the eyes of other people or pets. • This product should only be used by adults. Keep it away from children! • Do not use the laser pointer for entertainment purposes. If you store this product in a place where there are children, such as in a school or at home, consider using the laser disable feature described in the Operation section of this User’s Manual. LANYARD Your Stagehand comes with an optional neck lanyard. Read the important safety warning and installation instructions included with the lanyard before using it. Stagehand User’s Manual, page 3 Features Features • Stagehand controls computer presentations by sending keyboard commands from the remote control to the Stagehand USB receiver via 2.4 GHz radio signals. Since these are radio signals rather than infrared signals, there is no need to maintain line-of-sight between the remote control and receiver. Note: Stagehand only indirectly controls a projector via the computer and does not control the mouse pointer on your computer screen. • Plug & play installation. No software installation. • Stagehand provides the following slide show controls for PowerPoint running on Windows Vista & XP. Note: not all these controls are available in older versions of PowerPoint, in Mac OS X, or in other presentation programs. • Start slide show • Advance slide • Reverse slide • Black screen • White screen • Toggle window • Exit slide show • Signal distance is approximately 50 feet. Stagehand may operate at longer or shorter distances depending on obstructions, battery strength, and other variables. • Built-in laser pointer. Can be disabled for extra safety at school and home. • Handy LED illumination light lets you check notes and equipment problems without needing to turn on room lights. Stagehand User’s Manual, page 4 Features • Power, signal, and reprogramming LED indications on USB receiver provide useful feedback. Note: the USB receiver is not a flash memory drive and cannot be used to store presentations. • On/off switch extends battery life and prevents battery drain caused by unintentional button pushing when carrying or storing the product. • Control one computer with multiple remote controls or control multiple computers with one remote control (purchase of multiple sets required). • ID codes set to random values at factory to decrease chance of conflicts among multiple Stagehand remote controls operating in adjacent rooms, such as in schools. The ID codes are reprogrammable just in case a highly unlikely conflict occurs. • Channel can be reprogrammed in case of interference between your Stagehand and other radio frequency (RF) devices. • Reprogrammable up and down buttons. • Optional neck lanyard with quick release buckle provides a convenient way to avoid setting the remote control down during a presentation and forgetting where it is. • Travel pouch with internal slot for USB receiver for convenient storage of remote control and receiver. See Operation section for details. Stagehand User’s Manual, page 5 Installation Installation • Pull the battery protector film out from the battery compartment on the back of the remote control. • Move the on/off button on the right side of the remote control to the “on” position by sliding it up. To confirm that it is on, push the small round button located right above the Atek logo to see if the white LED illumination light below the logo turns on. Stagehand User’s Manual, page 6 Installation • After your laptop or desktop computer is powered on and fully booted up, plug the Stagehand USB receiver into the computer’s USB port. A solid color LED on the USB receiver indicates the receiver has power from the computer. The LED flashes when it receives keyboard command signals from the remote control, but do not push any buttons on the remote control yet. Do NOT push the button on the receiver (the remote control and receiver are already preset in the factory to communicate with each other). Wait until the pop-up message on your computer screen says that the installation is complete and the device is ready to use before using the remote control. • Optionally install the enclosed neck lanyard per the separate safety warning and installation instructions that come with the lanyard. Remember to turn the remote control off after use to extend battery life and prevent accidental battery drain. Read the Operation section below for detailed instructions on how t...