Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Factory default settings are indicated by bold text. Note : The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual. NOTE: Keyless Entry Models with no horn output will Flash the Parking Lights instead of chirp where chirp is indicated. Also, No data will be indicated if a feature is not available for a particular model. The unit will enter the feature but no selection will be available. RF Programmable Feature Bank 1 Is For Transmitter Programming See Transmitter Programming Guide. RF Programmable Features Bank 2 Is Alarm Selectable Features: Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps 5 Chirps 6 Chirps 1st DoorL/UL 1 Sec. 3.5 Sec. 1 Sec L, Dbl. U/L Dbl L, 1 Sec UL Dbl L, Dbl UL 1 S l/350mS ul 2nd Accy Lock Not Available 3rd Accy. UL Not Available 4th Headlights Not Available 5th Passive Locks Not Available 6th Pass/Act Arm Not Available 7th Siren/Horn Not Available 8th Horn Chirp Not Available 9th O/R Method Not Available 10th 2 Step U/L Not Available 11th Chp Del Tx Not Available 12th Voltage/Hd Wire Not Available 13th Trigger Circuits Not Available 14th Lock/Unlock Poll Not Available 15th Aux Ch 5 Sel Not Available 16th Aux Ch 6 Sel Not Available 17th Aux Ch 7 Sel Not Available 18th Trigger Delay Not Available When using the RF programmer, enter the program mode as follows: Turn the ignition on Press and release valet switch 3 times turn ignition off then on Press and hold valet switch for Siren and or lights chirp/flash 1 128-77671 of 19 To program these selectable features; Action System Response Turn ignition on No response Press and release the valet switch 3 times 1 Chirp - LED 1 flash Within 3 seconds, turn ignition Off Then On Short chirp, then long chirp This Action Accesses Feature Bank 2 Alarm Selectable Features First Press and release the valet switch 1 time 1 chirp = 1 second door lock & unlock Press transmitter Lock button to change 2 chirps = 3.5 second door lock & Unlock Press transmitter Lock button to change 3 chirps = 1 sec. lock, dbl 1 sec. unlock Press transmitter Lock button to change 4 chirps = dbl 1 sec lock, 1 sec unlock Press transmitter Lock button to change 5 chirps = dbl 1 sec lock, dbl 1 sec unlock Press transmitter Lock button to change 6 chirps = 350mS unlock. 1 sec lock or Second Press and release the valet switch Non Functional On This Unit or Third Press and release the valet switch Non Functional On This Unit or Fourth Press and release the valet switch Non Functional On This Unit or Fifth Press and release the valet switch Non Functional On This Unit or Sixth Press and release the valet switch Non Functional On This Unit or Seventh Press and release the valet switch Non Functional On This Unit or Eighth Press and release the valet switch Non Functional On This Unit or Ninth Press and release the valet switch Non Functional On This Unit or Tenth Press and release the valet switch Non Functional On This Unit or Eleventh Press and release the valet switch Non Functional On This Unit or Twelfth Press and release the valet switch Non Functional On This Unit or Thirteenth Press and release the valet switch Non Functional On This Unit or Fourteenth Press and release the valet switch Non Functional On This Unit or Fifteenth Press and release the valet switch Non Functional On This Unit or Sixteenth Press and release the valet switch Non Functional On This Unit or Seventeenth Press and release the valet switch Non Functional On This Unit or Eighteenth Press and release the valet switch Non Functional On This Unit or Press and release the valet switch or turn the ignition off to: Exit Programming Mode or Turn ignition switch off then on to advance to feature Bank 3: 2 128-7767 2 of 19 3 128-77673 of 19 To exit program mode, turn ignition off, or press and release valet switch. RF Programmable Features Bank 3 Is Remote Start Selectable Features: Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps 5 Chirps 6 Chirps 1st Defrost Output Not Available 2nd RF Start Chirp Not Available 3rd Run Time 5 Mins 10 Mins 15 Mins 20 Mins 4th Parking Lights On Steady Flashing 5th Input Check Voltage Tach DBI Input 6th Voltage Level >0.5V B4 Start < 0.5V B4 Start 7th Ign. 2 Select Off During Crank On During Crank Same As Accy. 8th Ign. 3 Select Not Available 9th Diagnostics Off On 10th Crank Time 0.8 Sec 1.0 Sec 1.5 Sec 2.0 Sec 11th Gas/Diesel Gas Diesel 10 Diesel 15 Diesel 20 12th Transponder O/P While R/S On During Start Until Ign. Off 13th Temp Start Not Available 14th Crank Averaging Averaging Preset Time Note: When averaging, the engine must be started 4 times with the key to be effective. 15th R/S Shock Not Available 16th Turbo Select Not Available 17th Black/Blue (Aux O/P) Single Pulse As Feature #1Bank 2 Note: When setting feature #17 to operate as feature #1 Bank 1 the transmitter under R/S command. So in...