Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
2. Set TV source to A/V input 3. Scan Channels and Auto-programming 3-1 Press the [ A /P ] button on the remote. Tuner will scan all channels in the “AIR” and “CATV” modes and memorize channels with PAL TV signal in the modes for “AIR” and “CATV”. It takes 45 and 75 seconds to scan in the “AIR” and “CATV” modes respectively. 4. Adjust the volume of Audio Output 4-1 Press the [ VOL + ] button to increase the audio volume. 4-2 Press the [ VOL - ] button to decrease the audio volume. 5. Adjust the TBXPAL’s System Settings Press [ MENU ] button to activate the setting menu. 5-1 The 1st menu item is “TUNER MODE”. Press [ > ] or [ < ] to browse and select a tuner mode from “AIR” and “CATV”. 5-2 Press [ MENU ] 2nd time. The 2nd menu item is “AUDIO OUTPUT”. Press [ > ] or [ < ] to browse and select an option from “STEREO”, “MAIN”, “SUB” or “MONO” depending on the audio signals available in the TV signal. 5-3 Press [ MENU ] 3rd time. The 3rd menu item is “CHANNEL SKIP”. Press [ > ] or [ < ] to turn the skip mode “ON” or “OFF”. When skip mode is “ON”, pressing [ CH+ ] or [ CH- ] will go to next or previous broadcasted channel. When skip mode is “OFF”, pressing [ CH+ ] or [ CH- ] will increase or decrease the channel by one. 5-4 Press [ MENU ] 4th time. The 4th menu item is “RESET”. Press [ > ] or [ < ] to restore the factory’s default value for above settings, and remove programmed channels with PAL TV signal for “AIR” and “CATV” modes. All settings are saved to non-volatile memory when OSD disappears. ( Approximate 6 seconds for storage) 6. Searching a channel and Watching 6-1 Press [ CH+ ] or [ CH-]. 6-2 Directly Input a channel number by pressing [ 0 ] ~ [ 9 ] buttons. 3 Item Function 1 AUDIO-LEFT OUTPUT (RCA) 2 AUDIO-RIGHT OUTPUT (RCA) 3 VIDEO OUTPUT (RCA) 4 EXTERNAL REMOTE INPUT 5 TV ANTENNA INPUT (IEC 169-2) 6 POWER INPUT Specification Composition Video Output 1 Vp-p @ 75 ohm Audio Output 0.5 Vp-p @ 10K ohm RF Input Socket IEC 169-2 TV System PAL B/G, D/K, I DC Input / Operating Range +12VDC (10 ~ 16 VDC) Power Consumption 4.8W (Max.) Installation Instructions 1. Locate a suitable location close to “AV monitor” (Television, etc.) 2. Connect Red wire to +12VDC Accessory Source. 3. Connect Black wire to a known chassis ground -12VDC 4. Plug the other end of the DC power cord into the TBXPAL. 5. Connect TBXPAL A/V output to TV A/V input using supplied RCA cable. 6. Connect TV coax cable to “TV ANTENNA INPUT”. 7. Plug the external IR cable for remote controlling. Connect the external IR cable and mount IR Sensor where it will be easy for viewer to use. 4 ...
Este manual também é adequado para os modelos :Controle remoto - Universal Remote (94.2 kb)