Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
(A Page 25 [SHUTTER]) (A Page 29 [Operable Camera Features]) [STEP] : Change the shutter speed with the fixed values. The fixed values differ depending on the Video Format of the camera. Format STEP value HDV-HD60P 1/100, 1/250, 1/500, HDV-HD30P 1/1000, 1/2000, 1/4000, DV-60I 1/10000 HDV-HD24P DV-24P DV-24PA HDV-HD50P 1/120, 1/250, 1/500, HDV-HD25P 1/1000, 1/2000, 1/4000, DV-50I 1/10000 DV-25P [VARIABLE] : Use this mode when shooting an image on a computer monitor, etc. (Variation range: approx 1/50 to 1/2000) *The AVARIABLEB function is unavailable when connected to GY-HM790 series. Memo : . Values that are not available on the camera cannot be set on this unit. (A Page 29 [Operable Camera Features]) . The shutter speed displayed on the RM-HP790DU/RMHP790DE may be slightly different from the actual shutter speed of the camera. Gain Adjustment Iris Adjustment When the illumination of the object is insufficient, the electrical gain can be boosted as described below. Memo : . When the [FULL AUTO] or [ALC + EEI] is ON, the gain becomes ALC. However, the Gain is Lolux in the Lolux mode. The gain cannot be varied in this mode. SHUTTER GAIN F3 MENU/SHUTTER GAIN PAINT AUTO BR W.BAL WHITE STEP SHUTTER MENU PUSH-ON DOWN UP VARIABLE PUSH-ON HIGH LOW B A PRESET MID DOWN UP F4 9dB [GAIN] light [GAIN-STEP] switch Gain display [GAIN] control knob 1 The gain is boosted according to the position of the [GAIN-STEP] switch as shown below (The gain boost values shown below are factory settings.) LOW : 0 dB (No gain boost) MID : 9 dB (Gain approximately tripled.) HIGH : 18 dB (Gain approximately octupled.) The gain boost values of these switch positions can be modified to the following values. (Available values: -3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 15dB, 18 dB) ( APage 25 [GAIN LOW], [GAIN MID] and [GAIN HIGH]) Memo : . Values that are not available on the camera cannot be set on this unit. . A-3 dBB is not displayed when connected to GY-HM790 series. (APage 29 [Operable Camera Features]) 2 When the [GAIN] control knob is pressed, the Variable Gain mode starts and the [GAIN] light is turned on Memo : . The gain value set in the Variable Gain mode is applied in priority over the gain switch setting. . This function is unavailable when connected to GY-HM790 series. 3 The gain can be fine adjusted between 0.1dB and 18dB in 0.1dB steps in the Variable Gain mode. Also, in this mode, the maximum gain value can be set to A9 dBB, A12 dBB or A18 dBB When the variation step is set to A1.0 dBB, the gain can be varied from 1dB to 18dB in 1dB steps. ( APage 25 [V. GAIN STEP] and [V. GAIN MAX]) The camera lens iris can be adjusted from the RM-HP790DU/RM-HP790DE. Memo : . When the light in the [IRIS-AUTO/MANU] button is not lit, the iris control is set to Auto mode, in which the iris level is controlled automatically according to the light intensity. The auto iris value cannot be adjusted with the [IRISCLOSE OPEN] control knob. 1 When the light in the [IRIS-AUTO/MANU] button is lit by pressing the button, the iris control is set to Manual mode, in which the iris level can be controlled using the [IRIS-CLOSE OPEN] control [IRIS-CLOSE OPEN] control knob WHITE MASTER BLACK IRIS P PAINT R AUTO B H W.BAL POWER AUTO MANU B A CLOSE OPEN PRESETW MID REMOTE CONTROL UNIT RM-HP790 [IRIS-AUTO/MANU] button Memo : . Set [IRIS MODE] switch of lens to side AAB. W T [IRIS MODE] switch . When [ALC + EEI] or [FULL AUTO] is AONB, the [IRISAUTO/ MANU] button is forced to the Auto mode. ( A Consult the [INSTRUCTION MANUAL] of the camera in use.) 18 Camera Adjustments Since color temperature varies depending on the light source, the white balance should be adjusted whenever the main light source illuminating the object being shot changes. AUTO white balance adjustment (Auto Set) 1 Press the [W. BAL] switch to select memory ABB or AAB 2 Press the [WHITE-AUTO] button to start the auto white balance adjustment of the camera within a second . When the connected camera has an Auto Set function, pressing and holding the button for more than a second initiates the Auto Set mode and starts the auto blackbalance and auto white balance adjustment operations. . When the camera does not have the Auto Set function, it is only the auto white balance adjustment that is started by this button. . When the white balance is adjusted properly, the LCD display shows AAUTO WHITE A(B) OKB. Memo : . The light in the button lights up during an auto white balance adjustment or an Auto Set of the camera and turns off when it completes. . The light in the button also lights up when the FAW (Full Auto White) balance adjust function of the camera is working. . The LCD display shows the operating status of the auto white balance adjustment or Auto Set operation. . If the white balance is not adjusted properly, the LCD display shows an error message. (A Page 28 [Error Messages]) White paint operation This can be performed after completion of the auto white balance adjustment and enables the fin...
Este manual também é adequado para os modelos :Controle remoto - LST1153-001A (1.74 mb)