Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
(PROG– = 0, PROG+ = 1, VOL– = 2, VOL+ = 3) e.g. when the code is 012313 press PROG–, PROG+, VOL–, VOL+, PROG+, VOL+. – The green LED flashes twice. CHECK That’s it! Press a few keys to check correct response. If response is not correct, repeat procedure beginning at step 1 using the next 6-digit code in the list. NOTE -If the LED displays one long flash, the code was not recognised. Please go back to step 1 and repeat the procedure, using the next 6-digit code in the list. -If no key is pressed within 30 seconds, you have to start again at step 1. -If no correct code is in the list, go to the next paragraph. 3 XP SBC RU 130 16-06-2000 10:19 Pagina 4 Instructions for use English ADVICE Carefully read the complete procedure before starting! You do not know the brand of your equipment/ you can not find the right code in the code list » auto search: 1 Be sure your device is switched on (if the device is a VCR, please insert a tape and start playback). 2 Press the mode key for the device (TV, VCR or SAT) you want to operate. 3 Press and hold keys mute and power simultaneously -for about three seconds- until the green LED lights up. (Release the keys: the green LED should stay on) 4 Press the power key repeatedly until the equipment switches off. Make sure that you keep the remote control pointed at your equipment. – Each time the green LED flashes, another code is sent. When the right code is found, the equipment switches off. If you accidentally press the power key again, after the equipment switched off, you miss the correct code! If you accidentally skipped the code follow the next procedure starting at step 5. If you did not skip the code go to step 8. MODE PROG 5 Switch the equipment manually back on. 6 Press ‘PROG–’ (down only!) a couple of times. 7 Press the power key repeatedly until the equipment switches off. 8 Press the mute key to lock the correct code in the SBC RU130’s memory. – The green LED flashes twice. CHECK Switch equipment on manually. Press a few keys to check correct response. If response is not correct, repeat procedure beginning at step 1. NOTE -The search time averages about 90 seconds. (Maximum search time is 5 minutes for TV, 2 minutes for VCR and 4 minutes for SAT). - If the LED blinks twice, after you pressed the power key (step 3), this means you have tried all codes. If non of the codes worked, try the Autosearch procedure again, starting at step 1. 4 Instructions for use XP SBC RU 130 16-06-2000 10:19 Pagina 5 XP SBC RU 130 16-06-2000 10:19 Pagina 5 + PROG PROG VOL + VOL PUNCH-THROUGH SOUND Punch-through sound enables you to control the audio level of your TV, regardless of what device mode the remote control is in. POWER/DIGIT TOGGLE Even when your TV can be activated by using a digit key only (e.g. digit number 1) instead of using the power key, you need to install the "Power/Digit Toggle" function. After you installed this function, the power key will send out the "power on/off" code, the first time you press the "power" key and the "digit 1" code when you press the "power" key for the second time. In this way it is possible to activate your TV even when it responds to digit codes only. To install this "Power/Digit Toggle" function, follow the following procedure: 1 Look up the "Power/Digit toggle" code in the code list (centre of this manual). 2 Make sure the remote control is...
Este manual também é adequado para os modelos :Controle remoto - SBCRU130/00U (505.13 kb)
Controle remoto - SBCRU130/85 (505.13 kb)