Assessments - 1, GPA: 2
(
)
)
|
Facilidade de uso
11. PIP TV Picture-in- Picture control. 12. CC (SUBTITLE) TV Closed Caption (if your TV has this feature) or DVD Subtitle toggle. 13. RECORD, PLAY, STOP, REW, FF, PAUSE VCR control buttons operate your VCR even when the remote is set to operate the TV. Also operates DVD Scan -/+. 14. CHAPTER +/-controls DVD/CD track selection i.e. DVD/CD Track Skip Up/Down (in DVD and SAT modes). Note the VCR buttons also control DVD when in DVD Mode. 15. SLEEP Turns off the TV after a period of 1 to 99 minutes. 16. MUTE Turns off the TV sound while the picture remains. 17. TOGGLE Swaps TV PIP screens. 18. CHANNEL UP/DOWN Changes the channels. 19. QUIT Used to exit menu functions. 20. INFO/SELECT Displays/selects on-screen channel information, etc. 21. TV/VCR/INPUT For some TVs, press repeatedly to select from available viewing sources (antenna, cable box, VCR, etc.). 22. NUMBERS Enter numbers for direct channel selection. Some products require Enter to be pressed after channel selection. 23. POWER Turns product On or Off. 4 5 SetupButton Functions, cont. DVD Functions SCAN+ and SCAN-buttons control the speed of Fast Forward and Reverse Playback respectively. CHAPTER+ and CHAPTER-buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc. SUBTITLE button turns the subtitles on or off. REPEAT button performs DVD players “A-B Repeat” (or RPT A.B) function for repeat play of current Chapter or Track. INFO/SELECT button brings up DVD Display or Control Menu for Chapter/Track/Title number, Time remaining/elapsed indication, system information, etc. QUIT button is used to Exit or Clear on-screen Menu displays. PLAY button is used to start Disc playback and for Menu selection on some DVD players. STOP button stops Disc playback. PAUSE button pauses Disc playback - press PLAY to resume. INPUT button activates the DVD Players SETUP Menu. SAT Functions GUIDE button displays on-screen Satellite Channel Guide. CHAPTER+ and CHAPTER-buttons perform the “Page+” and “Page-” function for on-screen Guide Menus used by some Satellite systems. INFO/SELECT button brings up Satellite Display screen for current Channel and system information. MENU brings up the Satellite Menu screen - use with the UP, DOWN, LEFT & RIGHT navigation buttons. OK button is used for on-screen Menu selection. QUIT button is used to Exit or Clear on-screen Menu displays. INPUT button performs the Satellite TV/SAT function. Battery Installation 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. 3. Press the battery cover back into place. Battery Saver Your remote automatically turns off if the buttons are depressed more than 30 seconds. This will save your batteries should your remote get stuck in a place where the buttons remain depressed (e.g., between the sofa cushions). Code Saver You will have up to 10 minutes to change the batteries in your remote without losing codes you have programmed. However, do not press any buttons until batteries are installed in the remote. If buttons are pressed without batteries in the remote, all codes will be lost. Power-On Default The remote powers on in TV mode. Code Setup The CODE SEARCH button is used to setup the remote. You can either setup the remote using the code for your brand of product, from the code tables (on separate sheet), or you can search through the library of codes until you find a code that works for your product. Please refer to “Programming with Code Search” on page 8 for more information on using the code search feature to learn how to search through the library of codes for your products. NOTE: You can store any kind of code under any mode (except TV). I.E. you can store a VCR code under the CBL button, or a DVD code under the VCR button, etc. However, you can only store TV codes under the TV button. 6 7 Code Search, cont.Direct Code Entry 1. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button. 2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 4 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand. Write your codes down here for easy reference later. Type Type stored Code TV TV VCR DVD SAT/CBL Code Search If your product does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the device (TV, VCR, etc.) to be controlled. 2. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEAR...
Este manual também é adequado para os modelos :Controle remoto - US2-PM335 (343.23 kb)
Controle remoto - PM335B (343.23 kb)
Controle remoto - PM335 (343.23 kb)