Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Make sure there are no objects between the RF Extender and the receiving eyes of the devices. User Guide 3 Installation Mounting The RF Extender can be mounted to a piece of furniture using the included mounting plate and the 4 screws. Take into account the range and the working angle of the IR blaster as explained on p. 3. Also make sure to place the RF Extender in a central position aimed directly at your devices. Warning It is adviced not to place the RF Extender inside or near a metal closet as RF signals can be disturbed by metal objects. 1 Remove the mounting plate from the bottom of the RF Extender. 2 Screw the plate to a rack, closet or another piece of furniture. Provide sufficient space to connect the power adapter and to slide the RF Extender back on. Note Depending on the surface, it may be possible to attach the RF Extender to the furniture using a piece of 2-sided tape. Look for the right position and make sure there is sufficient space. 3 Slide the RF Extender on the mounting plate. Using the Dual IR Emitters Like the IR blaster of the RF Extender, the dual IR emitters send out IR signals. You can use the dual IR emitters as an alternative for the IR blaster. When to use the emitters The IR emitters can control devices the IR blaster cannot reach, for instance when there is limited space around the receiving eyes of the devices, e.g. in a small closet. Note The IR emitters can also be used in combination with the IR blaster of the RF Extender. Both send out IR signals simultaneously. This allows you to operate several devices using both the IR blaster and the IR emitters. User Guide 4 User Guide Installation How to use the emitters The dual IR emitters can be attached to the surrounding surface facing the receiving eyes or directly to the receiving eyes. 1 Attach the emitters to a surface above, below or in front of the receiving eyes of your devices (for aesthetic appearance or when it is difficult to locate the receiving eye). – or – Attach the emitters directly to the receiving eyes of your devices. 2 Plug the dual IR emitters into the RF Extender. Note To avoid interference, the wires of the emitters should be kept away from the RF Extender as far as possible. Connecting the Power Adapter When connecting the power adapter it is recommended that you plug the adapter into the RF Extender before you plug it into the socket. When connected you will see a red LED on the RF Extender. Note To avoid interference, the adapter cable should be kept away from the RF Extender as far as possible. User Guide Installation How to use the emitters The dual IR emitters can be attached to the surrounding surface facing the receiving eyes or directly to the receiving eyes. 1 Attach the emitters to a surface above, below or in front of the receiving eyes of your devices (for aesthetic appearance or when it is difficult to locate the receiving eye). – or – Attach the emitters directly to the receiving eyes of your devices. 2 Plug the dual IR emitters into the RF Extender. Note To avoid interference, the wires of the emitters should be kept away from the RF Extender as far as possible. Connecting the Power Adapter When connecting the power adapter it is recommended that you plug the adapter into the RF Extender before you plug it into the socket. When connected you will see a red LED on the RF Extender. Note To avoid interference, the adapter cable should be kept away from the RF Extender as far as possible. 5 Installation Settings As the RF Extender ‘communicates’ with the Pronto Remote Control, you have to set the same Extender ID (identity) on both appliances. The settings depend on whether you have a single RF Extender or multiple RF Extenders. Single RF Extender When you use only one RF Extender, you can accept the default setting for the Extender ID (ID=0). Make sure your Pronto Remote Control is set to the same default setting (see the Pronto User Guide for more details). Multiple RF Extenders If you want to operate several of your devices independently, e.g. grouped on different locations, you will need multiple RF Extenders. When using several RF Extenders, it is important to assign a unique Extender ID to each RF Extender. 16 Extender IDs (from 0 to 9 and from A to F) can be assigned. 1 Choose an Extender ID for the RF Extender by turning the ID dial with a small screwdriver. 2 On the Pronto Remote Control, choose the same Extender ID for each device controlled by the RF Extender. Refer to the Pronto User Guide for more information. 3 Try to operate your devices with the Pronto Remote Control. The red LED will blink when the RF Extender receives a correct command. 4 Repeat this procedure for every RF Extender. RF Interference If your devices are not responding to commands or if the red LED on the IR blaster is blinking without sending commands, it might be possible that there is RF interference. This can be the case when other RF appliances are operated nearby, for instance at your neighbours. When you...
Este manual também é adequado para os modelos :Controle remoto - RFX6000/01 (611.91 kb)