Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
• Keep keys 9 / D and ; / E pressed simultaneously for 3 seconds to deactivate the child lock function. Storing favorite TV channels/Learning keys The FAVORITES keys (A, B, C, D and E) are default set to select the first five channels on your TV. If you wish, you can reassign these keys to another function. You can store other (favorite) TV channels under them or learn the keys functions from your original remote control that you miss on the SRU 1020. The example below (reassigning the E key for TV) instructs you how to do this. 1 Make sure you have the original TV remote control at hand. 2 Keep keys E and TV pressed simultaneously for 5 seconds until the TV key remains lit. Place both SRU 1020 and original remote control on a flat surface (e.g. a table) and aim them head-to-head with about 5-10 cm in between. 4 Storing favorite TV channels On the original remote control: enter the favorite station number (e.g. 11). Be sure to enter the second digit within 30 seconds after the first one. OR 4 Learning keys On the original remote control: press the key which function you wish to copy (e.g. 2). – After a while, the TV key blinks twice to confirm that: - channel 11 is stored under the E key, or - the new function is stored under the E key. – If the TV key blinks once for a longer period, the TV channel or function is not stored. Repeat the above steps and be sure the remote controls are aligned as described in step 3. ENGLISH 5 Repeat steps 2 to 4 to store other favorite TV stations/learn other functions. • If you only wish to watch the stations, stored under the FAVORITES keys, you can disable selection of non favorite stations via the + PROG – keys as described under ‘Activating/deactivating child lock function’. • You can learn the FAVORITES keys functions from you original DVD remote control as well. For this, repeat above steps. Restoring the original functions of your remote control Follow the instructions below to rever t the SRU 1020 back to the factor y default settings: 1 Keep keys s and E pressed simultaneously for 5 seconds, until the key of the currently selected mode (TV or DVD) blinks twice and then remains lit. 2 Press keys 2 / B, PROG + and 9 / D in that order. – The mode key (TV or DVD) blinks twice to confirm that resetting was successful. The SRU 1020 is now rever ted back to the state it was when you first took it out of the packaging. 4. Troubleshooting • Problem – Solution • The device you want to operate does not respond when you press a key. – Replace the old batteries with two new R03, UM4 or AAA type batteries. – Point the SRU 1020 at the device and make sure that there are no obstructions between the SRU 1020 and the device. • The SRU 1020 does not respond properly to commands. – Maybe you are using the wrong code. Tr y programming the SRU 1020 again using another code, which is mentioned under the brand of your device, or reset for automatic search to find the right code. • Your brand of device is not in the code list. – Tr y to set the SRU 1020 automatically. See ‘Automatically setting the remote control’. • None of the codes works during manual setting of the remote control. – If that is the case, follow the instructions under ‘Automatically setting the remote control’. • A code cannot be learned / a TV channel cannot be stored under the FAVORITES keys. – The IR signal of the original remote control is out of range. The SRU 1020 only recognizes IR signals with a carrier signal of 30-60 kHz. – The SRU 1020 memor y is full. Revert the SRU 1020 back to the factor y default settings in order to create memor y space. See ‘Restoring the original functions of your remote control’. – The SRU 1020 stopped the learning / programming process after 30 seconds for no IR signals were received. Check if the original remote control is working properly. 10 FRANCAIS Sommaire 1. Introduction ..............................................................................................................................................................10 2. Installation de la telecommande ....................................................................................................................10-12 Inser tion des piles........................................................................................................................................................................................10 Essai de la telecommande ......................................................................................................................................................................10 Configuration de la telecommande ...........................................................................................................................................11-12 3. Touches et fonctions ........................................................................................................................................12-13 4. Autres possibilites .............................................