Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
To fully benefit from the support that Philips offers, register your product at For quick, clean and easy setup go to: After installing your remote control it can operate the most important functions of your Philips branded TV or DVD manufactured since 1985. Installing the remote control 2.1 Inserting the batteries 1 Press the cover inwards and slide it in the direction of the arrow. 1 132 Place two AAA type batteries into the battery compartment, as shown. Replace the cover and click it firmly into place. ENGLISH Installing the remote control 3 ENGLISHENGLISH 2.2 Testing the remote control The SRP5002 is programmed to operate the most of the functions used on Philips TV and DVD. Because the available functions are not the same for all the Philips TV and DVD models, it is advisable to test whether your device fully responds to the SRP5002. Example of TV: Turn your TV on manually or use the original remote control. Tune to channel 1. Press the TV key to select TV. 12 • The key lights up. • If the key does not light up, check whether the batteries are properly inserted (see ‘2.1 Inserting the batteries’). 2 2 Checkwhetherallthekeysareworking. Foranoverviewofthekeysandtheirfunctionssee‘3.Keysandfunctions’. 3 • If the TV responds as it should to all of the key commands the SRP5002 is ready for use. Tip If the TV does not respond at all or not to all of the key commands, follow the instructions under ‘2.3 Setting the remote control’, or for online setup go to: 2.3 Setting the remote control This is only necessary if your device does not fully respond to all the command keys of your remote control. If that is the case, the example below instructs you how to look for a most suitable set up on the remote control for your Philips branded TV or DVD. Example of TV: 1 Press the mode key of the device you wish to set up the remote for. E.g. the TV key. 3 3 4 Installing the remote control 2 Press and hold the OK key and digit key 1 until the LEDs under the TV Mode key flashes twice 4 ENGLISH4 3 • If the LED of the TV Mode key flashes twice just once for an extended period, the code has not been entered properly. Start again by pressing the OK key and the digit key. Check if you can operate all the functions on your TV with the SRP5002. • If there are keys that do not respond properly go back to step 2 and press OK key and digit key 2.You can repeat this operation until you find the programming that better fits your Philips TV, combining the OK key with any digit key from 1 to 9. • For DVD you can combine the OK key with digit keys from 1 to 7 Tips for DVD set up: If you own a Philips DVD rewritable without Hard Disk Drive, while setting the remote control, on chapter ‘2.3 Setting the remote control’, step 2, press OK key and digit key 3. If you own a hard drive Philips DVD recorder, while setting the remote control, on chapter ‘2.3 Setting the remote control’, step 2, press OK key and digit key 4. If you own a Philips Blu Ray DVDplayer, while setting the remote control, on chapter ‘2.3 Setting the remote control’, step 2, press OK key and digit key 6. You might also find your set up code for Philips DVDR with Hard Drive by model. On the chapter ‘DVD setup by model’ you can look for your Philips DVD model and its set up code. When setting up the remote for DVD, be sure to press the DVD mode key before starting the set up from step 2. Installing the remote control 5 Device mode selection keys: • Select TV or DVD mode • Blink when the remote is setup • Light when a remote control is sent to the selected device (TV) text red (DVD) Pressed with SHIFT key -record (TV) text green (DVD) Pressed with SHIFT key -repeat (TV) text yellow (DVD) Pressed with SHIFT key -repeat AB (TV) text blue (DVD) Pressed with SHIFT key -shuffle (TV) Wide screen (DVD) Back Displays on screen channel information (TV) Smart sound (DVD) audio (TV) Smart picture (DVD) Surround (TV) Option/text hold (DVD) title/chapter Cursor up, down, left, right, in a menu Menu Adjusts the TV Volume Mutes the TV sound Direct choice of channels and other functions For extra functions.When pressed at the same time as a second key will get another function.All blue labelled keys can be used together with SHIFT. • For a complete list of the possible combinations for the SHIFT key, please check ‘4 Advanced Functionalities’ • Rewind (DVD). Active Control (TV) • Stop (DVD). Sleep (TV). • Play (DVD). Clock (TV). • Fast forward (DVD). Previous (TV). • Install 3Keysandfunctions1TV/DVD2TVtextColourkeys3WidescreenInfoSmartsoundSmartpicture45CursorKeys67-VOL+ 89numerickeys10Shift1159265+9ENEGLGISIHNLSH 2+ 6/Memory out • For leaving the teletext menu or the instalation menu on older Philips TVs 6 Keys and functions 12 (TV/DVD) Selects external:Audio/Video inputs connected to your equipment (A/V function). (DVD) pause 13 PROG + / K J • Selects a previous or following channel (TV and DVD.s with recording funcionality). ...