Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
2 Press and hold keys 1 and 6 simultaneously -for about 3 seconds- until the green LED lights up. 3 On the keypad, press keys 9, 9 and 2. 4 Press the mode selector key to select TV mode. 5 Press key 1. – The LED flashes twice to indicate successful set up. That’s it! Don’t forget to set up the SBC RU641 to operate this second TV. See the section Set-up for use. 1 9 9 2 1 6 TV VCR SAT DVD TV VCR SAT DVD 6 Instructions for use XP SBC RU 641/00 15-10-2001 12:24 Pagina 7 XP SBC RU 641/00 15-10-2001 12:24 Pagina 7 9 9 3 1 6 TV VCR SAT DVD TV VCR SAT DVD 1 9 Punch-Through Sound Punch-through sound enables you to control the audio level of your first or second TV, regardless of what device mode the remote control is in. EXAMPLE: You have installed a second TV under SAT mode. You can control that TV’s volume when you are in VCR mode. This feature is installed as a default setting for a first TV. To install this feature for a second TV: 1 Press the mode selector key to select VCR. 2 Press and hold keys 1 and 6 simultaneously -for about 3 seconds- until the green LED lights up. 3 On the keypad, press keys 9, 9, and 3. 4 Press the mode selector key to select SAT (second TV). 5 Press the power key. – That’s it! The LED flashes twice to indicate successful set up. The Volume up/down keys now control the volume of your second (SAT) TV when you’re in VCR mode. Functional back-lighting When you pick up the SBC RU641 and tilt it over about 60 degrees, the main keys for the device you want to operate are automatically back-lit. In VCR mode for example, only the main keys that are needed to operate the VCR are back-lit. You can choose to have all of the keys back-lit, or you can switch off the functional back-lighting feature completely. To back-light all of the keys: • Press keys 1 and 9 simultaneously -for about 3 seconds- until the green LED flashes twice. – The functional back-lighting is now de-activated and all keys light up when you pick up the remote control. Pressing keys 1 and 9 simultaneously again -for about 3 seconds- will return the back-lighting to its preset functional setting. Note The back-lighting turns off if you don’t move the remote control or if you don’t press a key within 4 seconds. English 7 Instructions for use XP SBC RU 641/00 15-10-2001 12:24 Pagina 8 XP SBC RU 641/00 15-10-2001 12:24 Pagina 8 English Tip The automatic back-lighting provides you with unparalleled ease of use, even in the most dimly-lit of rooms. While the remote control is actively being moved about the backlighting stays on. This consumes more power than normal and may require you to change your batteries more frequently. You can easily turn the back-lighting function off to conserve power. To do this please follow the instructions below. 7 9 0 6 4 0 To remove the back-lighting completely: • Press keys 7 and 9 simultaneously -for about 3 seconds- until the green LED flashes twice. – The back-lighting is now de-activated. Pressing keys 7 and 9 simultaneously again -for about 3 seconds- will return the back-lighting to its preset functional setting. TROUBLESHOOTING GUIDE • Problem: – Solution: • Device is not responding and the green light does not flash when you press a button. – Replace batteries with two new 1.5 volt, type RO3, UM4 or AAA batteries. • Device is not responding, but the green light does flash when you press a button. – Aim the SBC RU641 at the device and be sure that there are no obstructions between the SBC RU641 and the device. • The SBC RU641 is not performing commands properly. – You may be using the wrong code. Try repeating Set up using another code, listed under your brand, or start the Autosearch Set-up over again to locate the proper code. If the device still doesn’t respond, call the help-line and we’ll put you back on track. • The SBC RU641 drains batteries more frequently. – While the remote control is actively being moved around the back-lighting stays on. This consumes more power than normal and may require you to change your batteries more frequently. You can easily turn the back-lighting function off to conserve power. To do this please follow the instructions in the backlighting section. • You can’t access teletext pages and you were used to use this (fi) button to access teletext. – Follow Set up procedure and at step 5 of section “Your equipment is of another brand, or your equipment is a Philips brand, but not all keys respond correctly” press keys 0, 0, 6 and 4. To enter teletext pages, press the subtitle button. 8 15-10-2001 12:24 Pagina 9 Instructions for use XP SBC RU 641/00 • The teletext buttons do not work. – Be sure your TV has teletext capabilities. The SBC RU641 does not extend the capabilities of your TV! • You can’t turn teletext off. – Press the subtitle key to turn teletext off. • Having problems operating all the functions on your device. – The SBC RU641 may just need customising for your model type. Just call our help-line and we’ll put you back on track. • Your brand is not lis...