Follow the procedure on page 8 for the input select setting. “0” : TV tuner “1” : VIDEO1 “2” : VIDEO2 “3” : VIDEO3 “4” : VIDEO4 “5” : VIDEO5 “6” : VIDEO6 “7” : HD1 “8” : HD2 “9” : HD3 This setting can be used for programming the SYSTEM CONTROL buttons (page 41). 14GB Using Non-Preset Remote Control Operations — Learning Function To operate non-preset components or functions, use the following “learning” procedure to “teach” any of the programmable buttons and keys to operate the functions of another remote control. You can also use the learning function to change the signal of individual keys and buttons after setting the component code number (page 8). It is useful if you make a memo of the learned key functions in the LCD touch key display table (page 68). Note Some specific remote control signals may not be learned. TV CD MD SAT VCR TAPE DVD M1 CBL M2 AMP M3 PROGRAM 6 2 3 Example: To programme the N (Play) signal of your component to the VCR N (Play) key of the Commander 1 Place the RM-AV2500T head to head with your component’s remote control. Remote control for your component about 2 – 4 inches (5 – 10 cm) away RM-AV2500T 2 While pressing COMMANDER OFF, press the Component Select button for the component whose signals are to be learned. “LEARN” appears and all the learnable keys flash. Display for CHANNEL, VOLUME, MUTING, RECALL, MENU, OK, EXIT and cursor buttons Continued 15GB Using Non-Preset Remote Control Operations — Learning Function (continued) The “C+ C- V+ V- MUTE RECALL MENU OK EXIT R r T t” display indicates if PROGRAM +/–, w +/–, MUTING, RECALL, MENU, OK, EXIT and cursor (T t R r) buttons are learnable or not. Note on the flashing display The keys or buttons that are already preset for the component flash twice while those that are not preset flash once. 3 Press the key or button on the Commander you want to “teach.” “LEARN” flashes and the only pressed key remains on the dislplay. To teach on the PROGRAM +/–, w +/– , MUTING, RECALL, MENU, OK, EXIT and cursor buttons Press the corresponding button. “LEARN” flashes, and only the pressed button remains indicated on the display (“C+,” “C–,” “V+,” “V–,” “MUTE,” “RECALL,” “MENU,” “OK,” “EXIT,” or “R r T t” ). Example: When pressing the w + button To change the function display of the key Follow the procedure on page 18. 4 Press and hold down the button on the other remote control until you hear a beep. (If you release the button before you hear a beep, the signal may not be learned correctly.) “LEARN” stops flashing and stays lit. When the command has been learned successfully, the learned keys stay lit and the other learnable keys flash. If “NG” flashes on the display Learning did not succeed. Try Steps 3 and 4 again. 5 Repeat Steps 3 and 4 to teach functions to other keys or buttons. To learn another component’s remote control signal After positioning the two remote commanders as in Step 1 on page 15, press the corres...

Este manual também é adequado para os modelos :
- ()