Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
3 Step 1: Unpack............................................. 3 Step 2: Install Batteries ............................ 3 Step 3: Program the ARi3G.....................4 Tour of the Remote ...................................... 9 Advanced Operation ....................................11 Using Learning...........................................11 Volume Lock ..............................................14 Input Lock...................................................16 Using Master Power On/Off ...................17 The Tilt Switch...........................................18 Resetting Your Remote ...........................19 Pairing ...........................................................20 12 Month Limited Warranty.......................23 Introduction Thank you for purchasing the ARi3G universal remote control, the remote that lets you streamline your home theater experience. Your ARi3G remote offers the following benefits: • Integrates media centers or docking stations into home theater, allowing full control with one remote • Compatible with Apple® products • Controls docking stations, TVs, and audio devices Additional Features Your ARi3G remote has other features, described later in this manual: • Code Search • Backlighting • Volume Lock • Master Power • Input Select • Tilt-Switch Backlight On/Off • Learning Getting Started Step 1: Unpack Your ARi3G remote package contains: • The ARi3G Remote Control • The ARi3G User Guide • The ARi3G Code List • 2 AAA Batteries Note: You may need the guide and code book again in the future, so please be sure to keep them. Step 2: Install Batteries 1. Open the battery compartment cover (located on the back of the remote). 2. Place the two AAA batteries provided in the compartment and match the + and - polarity symbols inside. 3. Replace the cover. Battery Use And Safety • Use only fresh batteries of the required size and recommended type. • Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities. • If you do not plan to use the remote for an extended period, remove the battery. It can leak chemicals that can destroy electronic parts. WARNING: Dispose of old batteries promptly and properly. Do not burn or bury them. Step 3: Program the ARi3G IMPORTANT: By default, the MEDIA key on the ARi3G is set to control an Apple TV® device. If this is the device you want to control with the MEDIA key, you don’t need to program the key. If, however, you want to use the MEDIA key with a different device, follow the directions below to program the ARi03G to control that device. Direct Programming To set up the ARi3G to control your device: 1. Find the code for your brand of device in the accompanying code list. Codes are listed by brand name. Make sure that the device you want to control is switched on (not in standby). 2. Press the device key for the device you want to control (TV for a television, AUD for an audio receiver, or MEDIA for a docking station) to select the device. 3. Press and hold (mute) and Menu until the device key (e.g., TV) blinks twice (it will blink once then twice). 4. Use the transport keys to enter your 5-digit code: 1 2 34 5 For example, to enter 12345, press 5. The device key blinks twice. 6. Now, aim the remote at the device you want to control and press (power). If your device switches off, the remote should be ready to operate your device. continues on next page... 7. Turn your device back on and try all the remote’s functions to ensure they are working properly. If the functions work properly: Congratulations! You’ve programmed this key. If the functions do not work properly: Repeat steps 1-5 using another code listed under your brand. Searching for Your Code If your device does not respond to the remote after trying all codes listed for your brand, or if your brand is not listed, try searching for your code. Note: Because it goes through the entire library of codes, the code search may take a while. 1. Turn on the device you want to control. 2. Press a device key once (e.g., TV) to select the device. 3. Press and hold (mute) and Menu until the device key (e.g., TV) blinks twice (it will blink once then twice). 4. Press . 5. Aim the remote at the device and press the device key (e.g., TV), then press the (power) key. Did your device turn off? Yes: Press and hold the Menu key until the device key (e.g., TV) blinks twice. This indicates that the code has been saved. No: Repeat step 5 again. 6. Try the following keys with your device: , , (mute) If these keys work your device, you’ve finished programming this device key. If they do not work the device, repeat the code search from step 2. 7. To search for other device codes, repeat steps 1 to 6. Checking the Codes If you have set up the remote using the procedure in “Searching for Your Code”, you may need to find out which five-digit code is operating your equipment. For example, to find out which code is assig...
Este manual também é adequado para os modelos :Controle remoto - ARRI03G (1000.97 kb)