Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
The Mio R-3 is pre-loaded with firmware that allows joining to ZigBee Pro 2007 networks, but may be upgraded with firmware allowing access to older ZigBee 2004 networks. You need VisualArchitect and KeypadBuilder to properly program this device. The application and documentation are available from Power Transmission Mode Current Menu Battery Meter Custom Macro Buttons Custom Mode Options 14 - Select 15 - Move Right 16 - Guide 18 - Move Down 19 - Volume Up 20 - Last Selected 21 - Channel Up 22 - Mute 23 - Volume Down 24 - Channel Down 25 - Input 26 - Enter FIG. 1 The MIO R-3 Device 2 1 16 17 10 11 12 18 13 1514 19 23 21 24 20 22 25 26 43 8 6 9 5 7 Numeral Keypad 1 - Power 2 - Record 3 - Pause 4 - Stop 5 - Rewind 6 - Play 7 - Fast Forward 8 - Skip Back 9 - Skip Forward 10 - Menu 11 - Info 12 - Move Up 13 - Move Left 17 - Exit Touch And Tilt Sensor The MIO R-3 wakes up upon touching either the chrome side rails or pressing a button. When the remote times out while holding it, you can reawaken the device by tilting it. Errant jostling such as a bumped table will not wake the device unless you are holding it. Specifications The MIO R-3 device specifications are as follows: MIO R-3 (FG148-03) Specifications Dimensions (HWD) 9.50 x 2.00 x .74 (241.3 mm x 50.8 mm x 18.80 mm) Weight • .45 lbs (20 g) without batteries • .55 lbs (25 g) with batteries Battery Rechargeable Lithium-Ion Transmission Frequencies • Zigbee RF wireless network • IR 38 Khz • IR 455 Khz Transmission Range • ZigBee: 100 feet (30.48m) • IR 38 Khz: 100 feet (30.48m) • IR 455 Khz: 50 feet (15.24m) Top Components • LED - blue backlit buttons indicate device is awake • Display (OLED) -128 x 32 pixels, active area is 29.42mm x 7.98mm • Pushbuttons - the power button is red backlit; the rest are blue backlit buttons. 45 buttons; 9 custom buttons (3 macro and 6 device). MIO R-3 (FG148-03) Specifications (Cont.) Rear Component • Programming Port - 2.5 mm stereo female conductor jack • Battery Door • Rechargeable Battery Connection Supported • English • Korean Languages •French • German • Greek • Italian • Japanese • Simplified Chinese • Portuguese • Russian • Spanish • Other languages supported by Glyphs Certifications • FCC ID: CWU-NXR-MO • IC: 5078A-NXRMO •CE • IEC-60950 • Japan Approval • Designed for ZigBee Operating Environment • Operating Temperature: 0° to 40° C (32° to 104° F) • Storage Temperature: -20° to 70° C (-4° to 158° F) • Relative Humidity: 5% to 85% Included Items • MIO-RBP Rechargeable Lithium-ion Battery (FG147-10) Other AMX • DB-9 extension cable (FG10-727) Equipment • Programming Cable - a 3 wire, 2.5 mm stereo jack (FG10-817) • Custom engraving (FG147-01) • MIO-RCC Kit (FG147-03K) • MIO-RCC Charging Base (FG147-02) • NXR-ZGW (FG5791-01) • NXR-ZRP-PRO (FG5791-03) Installing Your Custom Buttons 1. Flip and turn the MIO R-3 device so that the buttons are facing away from you and the device is upside down. 2. Holding the device in both hands, place your thumbs on the battery door and push up to slide the battery door free. The battery door will slide in the direction of the bottom end of the device. 3. Unscrew the 6 screw points indicated in FIG. 2. 6 Screw Points Programming Jack FIG. 2 Internal MIO R-3 Components 4. Turn the unit over so the buttons are facing you. 5. Lift the top assembly away from the PCB. 6. If necessary, push out the standard buttons from the front of the top assembly. 7. Drop on your custom button pad and verify the alignment with the guide posts on the PCB. 8. Place the top assembly back down on the PCB and return the unit over, exposing the 6 screw points. 9. Tighten the 6 screw points. 10. Place the battery door back on the device, and slide the door upwards to lock it in place. Inserting the Lithium-Ion Battery into The MIO R-3 To install your Lithium-Ion battery into the MIO R-3 remote: 1. Flip and turn the device so that the buttons are facing away from you and the device is upside down. 2. Holding the device in both hands, place your thumbs on the battery door and slide the battery door free. The battery door should slide toward the bottom end of the device. 3. Connect the terminal end of the Lithium-Ion battery to the port as shown in FIG. 3. It may be necessary to use a thin, blunt non-conductive object to seat the battery connector fully within its port. Lithium-Ion Battery Correct path for Rechargeable Battery battery wires and Port Connection connector FIG. 3 Rechargeable Battery Port on The MIO R-3 Remote Battery Low Indicator When the battery charge level is too low to sustain continuous operation, the LCD flashes "Battery Low" and the device shuts down. Setup Mode The Setup mode allows you to set the following device features. Entering Setup mode 1. Press and hold the STOP button and the INPUT button. The two buttons must be pressed within 0.1 seconds of each other and held down for 2 seconds. The device indicates you are now in Setup mode. See below for available modes. 2. Press the ...