Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
While loading your configuration file make sure the device is situated as such that the batteries will not fall out. The load will fail if your batteries fall out during the process. The MIO communicates at 115200 baud rate. Refer to the MIO R-1 AUDIO Operation/Reference Guide for instructions on using the Programming Jack to load configuration files on the MIO R-1 AUDIO. Tone Control & SRS Setting To access the Tone Control and SRS settings, press the TONE button. This enables the Tone Control Mode with BASS as the first mode selected. There are 3 Tone Control Modes available for adjustment, and 4 SRS options, as follows: • BASS: Increase / Decrease from -10dB to +10dB (Up/Down NAV buttons) • Treble: Increase / Decrease from -10dB to +10dB (Up/Down NAV buttons) • Balance: Left / Right (Up NAV button = right, Down NAV button = left) • SRS options: BASS Boost, Focus, 3D, WOW The Source buttons on the Metreau keypad provides visual feedback as to which mode it is currently in. The following sources will light based on the current mode: • Source 1 = BASS • Source 2 = Treble • Source 3 = Balance • Source 4 = SRS When first entering Tone Control Mode, BASS mode is active (Source 1 LED is lit). To move from mode to mode, select the Center NAV button. This saves the setting and moves to the next mode. MIO R-1 AUDIO Specifications Power Requirements: 4 AAA Alkaline Batteries (included) - approx. 5 hours battery life Transmission Frequencies AMX 38 KHz/455 KHz IR Note: The Metreau MET-6N keypads only support 38 KHz. When used with MET-6N keypads, the MIO R-1 AUDIO must be set to 38 KHz. Transmission Range (distance) with MIO IR Receiver • 100 feet at 38KHz • 50 feet at 455KHz Transmission Range (angle) • 140 degrees (+/-70° from perpendicular) horizontally from an axisextending from the end of the remote. • 40 degrees (+/-20° from perpendicular) vertically from an axisextending from the end of the remote. Top Components • LED - blue backlit buttons indicate device is awake • Display (OLED) - 128 x 32 pixels, active area is 29.42mm x 7.98mm• Pushbuttons - the power button is red backlit; the rest are blue backlitbuttons. 45 buttons; 9 custom buttons (3 macro and 6 device). Rear Component • Programming Port - 2.5 mm stereo female conductor jack• Battery Door Dimensions (HWD) 9.50 x 2.00 x .74 (241.3 mm x 50.8 mm x 18.80 mm) Weight • .45 lbs (20 kg) without batteries • .55 lbs (25 kg) with batteries Operating Environment: • Operating Temperature: 0° to 50° C (32° to 122° F) • Storage Temperature: -10° to 70° C (14° to 158° F) Included Accessories: • 4 AAA Batteries Other AMX Equipment • DB-9 extension cable (FG10-727) • Programming Cable - a 3 wire, 2.5 mm stereo jack (FG10-817) • Custom engraving (FG147-01) • MIO-RCC Kit (FG147-03K) • MIO-RCC Charging Base (FG147-02) • MIO-RBP Rechargeable Lithium Ion Battery (FG147-10) • MIO Modero IR Receiver (FG5797-01xx; xx indicates color) Note: While in each of the modes, press and hold the Center NAV button to return to the default for that mode. SRS (Bass Boost, Focus, 3D and WOW) Settings Use the UP Nav button to cycle through the SRS Settings: BASS Boost, Focus, 3D, WOW (in that order). Use the Down NAV button to cycle backwards to the previous SRS setting. • Press and hold the Center NAV button to disengage/clear the SRS settings (none of the SRS modes will be engaged). • Press the Center NAV button to save SRS Mode & exit from Tone Control set-up. Only one SRS mode can be engaged per room/zone. Each room/zone, however, can have a different SRS mode. The Volume LED's are used to provide feedback as to which SRS setting is active: • No LED = SRS Off • LED1 = BASS boost • LED 1&2 =Focus • LED 1,2&3 =3D • LED 1,2,3&4 =WOW Moving from one SRS position to another disengages the original setting i.e. moving from WOW to BASS BOOST, disengages WOW. Zone Control • To turn a single Zone ON, press any Source button (or press the Power Button). Note: If the Power button is pressed, the zone will turn ON and will remember which source was previously ON. • To turn a single Zone OFF, press the Power button. • To turn a specific Source ON in all Zones, press and hold any Source button (the selected source will turn on and play in all zones). • To turn a specific Source OFF in all Zones, press and hold the active Source button. • To Turn All Zones OFF (System OFF), Press the "OFF" button. All zones will be turned off, and no sources will play. Note: One minute after an ALL OFF has been performed, the Controller and all Sources will be powered down Note: Pressing Source Buttons switches between sources and turns the Source On, but does not toggle between ON and OFF. Source Control The source control functionality outlined below represents "suggested" functions. All source control buttons (Up, Down, Left, Right, Center and Center HOLD) can be customized via the Controller Menu for all sources except for the Internal Tuner, which cannot be customized. Internal Tuner and Audio Server NAV Button...