Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Please retain this guide for future reference. Table of Contents Install the Batteries 1 Button Description 2-4 Programming for TV 5 Programming for VCR 6 Programming For DVD 7 Programming For DBS System 8 Programming For Cable 9 Programming For Audio 10 Programming For Second Device 11 Operating Audio Function 12-13 Sleep Functions 14 Programming With Code Search 15 Identifying Codes For Your Remote 17 Warranty 18 Lost Codes 18 This Universal Remote Control is already programmed for most GE, RCA and ProScan TVs, VCRs, DBS Systems, DVD Players, and Audio/Video Receivers. NOTE: For users of GE, RCA and ProScan DBS Products, older DBS models require that the DISPLAY Button on this remote be used to make program selections. Use the SELECT Button for making program selections on newer GE, RCA and ProScan DBS models. Battery Installation Your Universal Remote Control requires 2 AAA alkaline batteries. To install the batteries: 1. Turn the remote over and push down on the cover and slide it off. 2. Insert the batteries, matching the batteries to the (+) mark inside the battery case. 3. Slide the battery cover back into place. NOTE: Programmed codes will remain in memory for a short period of time allowing for battery replacement. If batteries have been dead for a prolonged period of time, reprogramming may be required. 1 Button Description INDICATOR LIGHT The Indicator Light flashes to show that the remote is working. ON•OFF The ON•OFF button operates the same as your original remote. NOTE: Some GE, RCA and ProScan models require you to press the device button to turn the device on and the ON•OFF button to turn the device off. TV, VCR, DVD, SAT, AUDIO, AUX, CBL The TV, VCR, DVD, SAT, AUDIO-AUX, and CBL buttons are used to select the device you want to control. VOL & CHAN The VOL (Volume) and CHAN (Channel) buttons increase or decrease the channel numbers or volume.The CHANNEL buttons also control the SKIP functions for DVD and CD Player. MUTE Mutes volume on the TV. PREV CHAN The PREV CHAN button allows you to go to the previous channel you selected. Operates the same as Last Channel, Go Back or Recall on your original remote. CODE SEARCH Used to program the remote or to search through codes. GUIDE Brings up the on-screen TV program guide if your TV has that feature. DISP Display Button shows the date and the time if your TV or VCR has that feature. NAVIGATION BUTTONS & SELECT Used to move through on-screen menuing and guides. With some DBS models the DISP button should be used to select the highlighted item. Use the navigation buttons to move the highlighted choice up, down, left or right. MENU•PROG Brings up the Main Menu. If you already in the menu system, press SELECT to select a highlighted choice. Use the arrows buttons to move through the Menu Selection. 2 CLEAR Removes the on screen display to return to normal viewing. 0-9 The number buttons operates the same as on your original remote, and are used for entering device codes. ENTER The ENTER button is used to complete channel selection for some brands of TV. It is also used to complete the code entry process. TV/VCR The TV/VCR button operates the TV/VCR function of your TV. REW, PLAY, FF, REC, STOP, PAUSE These buttons operate the same as on your original VCR or remote. You must press the REC button twice to begin recording. The REW and FF buttons also control the Reverse and Forward functions for DVD and CD Player. PIP, SWAP & INPUT PIP (Picture-in-Picture) and SWAP operate your television’s Picture-in-Picture features. INPUT selects the video input of your TV if equipped with this feature. SLEEP The SLEEP button allows you to set a time for you to turn off your TV automatically. Button Description For Audio Operation Press AUDIO device button to enable the AUDIO MODE Audio functions indicated by pink descriptions LEVEL+/LEVEL- Sets the level of the speakers during test tone mode. DSP ON•OFF Enables the receiver’s Digital Sound Processing Mode. DSP MODE When the DSP mode is enabled, pressing this button allows the user to toggle through the various DSP modes. CD, TAPE, TUNER, TV, VIDEO The CD, TAPE, TUNER, TV and VIDEO buttons are used to directly select the device you want to control. (Works in AUDIO mode). 3 AM•FM The AM•FM button allows you to select the AM•FM band on your audio receiver. FUNCTION Toggles the different audio input devices. The number buttons also select the function labeled below the buttons when in AUDIO mode. DELAY-, ON, DELAY+ Increases or decreases the delay between the surround and main speakers when the receiver is in the surround sound mode. ON•OFF, SURR. MODE ON•OFF SURR. toggles the surround modes on and off. SURR MODE toggles through the receiver’s various surround sound mode settings. FRONT, CENTER, REAR, TEST Adjust the levels of the front, center, and rear speakers respectively. The test tone must be enabled first by pressing the TEST button. PRESET Used to operate preset channels while in the AUDIO mode. 4 Programming Fo...