Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
SETUP Used to program the remote or to search through codes. TV, VCR, DVD•AUX, CBL•SAT The TV, VCR, DVD•AUX and CBL•SAT buttons are used to select the device you want to control. REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE The REVERSE, PLAY, FORWARD, RECORD, STOP and PAUSE buttons operate the same as on your original VCR remote. You must press the RECORD button twice to begin recording. Buttons also control similar functions for DVD and CD players. TV•VCR The TV•VCR button operates the TV•VCR function of your VCR. 1 ENTER The ENTER button is used to complete channel selection for some brands of TV. It is also used to complete the code entry process. VOL & CHAN The VOL (Volume) and CH (Channel) buttons increase or decrease channel numbers or volume. MUTE To MUTE the volume on the TV. PREV CH PREV CH allows you to go to the previous channel you selected. Operates the same as Last Channel, Go Back or Recall button on your original remote. 0-9 The number buttons operate the same as on your original remote, and are used for entering device codes or channel numbers. MENU The MENU button calls up the TV and DBS set up menus. Battery Installation Your Universal Remote requires two (2) new AAA alkaline batteries. To install the batteries: 1. On the back of the remote, push and slide the cover off. 2. Match the batteries to the + and -marks inside the battery case, then insert the batteries. 3. Press and slide the battery cover back into place. Note: Programmed codes will remain in memory for a short period of time allowing for battery replacement. If batteries have been dead for a prolonged period of time, reprogramming may be required. 2 Button Description 3 Programming For TV 1. Manually turn on the TV. 2. Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button. 3. Press and release the TV button (the INDICATOR LIGHT will blink then remain lit). 4. Find the three digit code for your TV in the TV code list, and enter it using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. 5. Aim the remote at your TV and press the ON•OFF button. Your TV should turn off. Note: If your TV does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 8. no further programming is required. 6. With your TV on, press CH+. If the TV responds, 7. Enter your code here for easy reference. 4 Programming For VCR 1. Manually turn on the VCR. 2. Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button. 3. Press and release the VCR button (the INDICATOR LIGHT will blink then remain lit). 4. Find the three digit code for your VCR in the code list and enter it using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. 5. Aim the remote at your VCR and press the ON•OFF button. Your VCR should turn off. Note: If your VCR does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 8. 6. With your VCR on, press CH+. If the VCR responds, no further programming is required. 7. Enter your code here for easy reference. 5 Programming For Cable Box or Satellite Receiver The CBL • SAT button is defaulted to RCA/ GE/ProScan DBS systems, however other DBS systems can be programmed to this button. 1. Manually turn on the Cable Box. 2. Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button. 3. Press and release the CABLE button (the INDICATOR LIGHT will blink then remain lit). 4. Find the three digit code for your Cable Box or Satellite Receiver in the code list and enter it using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. 5. Aim the remote at your Cable Box or satellite receiver and press the ON•OFF button. Your Cable Box should turn off. Note: If your Cable Box does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 8. 6. With your Cable Box on, press CH+. If the Cable Box or satellite receiver responds, no further programming is required. 7. Enter your code here for easy reference. 6 The DVD•AUX Button The DVD•AUX button can be used for a DVD player. It can also be assigned to any other type of device (another TV, VCR, DVD, CD Player, or audio receiver). 1. Manually turn on the the device you wish to assign to the DVD•AUX button (TV, VCR or Cable Box or DVD Player). 2. Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button. 3. Press and release the DVD•AUX button. The INDICATOR LIGHT will blink. 4. Find the three digit code for the device you wish to program in the code list Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. 5. Aim the remote at your device and press the ON•OFF button. Your device shoul...