Assessments - 2, GPA: 3
(
)
)
|
Facilidade de uso
• Click the wand handle into the top of the vacuum. • Ensure the hose is straight. Slide the wand straight down into the hose. • Attach the tools to the vacuum and wind the cord counter-clockwise around cord hooks and secure with clip. USINg YOUR dYSON vACUUM Unwind the cord and insert the plug into a suitable socket. Hold the cleaner head down with your foot and pull the handle downwards. To switch ‘ON’ or ‘OFF’ press the power button in front of the handle. CAUTION: • Do not use or store this vacuum below 32°F (0°C). Ensure that the vacuum is at room temperature before operating. • Do not allow the vacuum to be used by anyone who may not be able to operate it safely. • The use of an extension cord is not recommended. • Always switch off and unplug before performing maintenance on your vacuum. • When returning to the upright position, ensure the wand and clear bin TM assembly are vertical. • Ensure the cyclone is secured to the vacuum. Do not press the cyclone release button or shake the vacuum while carrying or it could fall and cause injury. • Store the vacuum indoors. Put the vacuum away after use with the cord coiled safely, to prevent tripping hazards. • Do not use outdoors or on wet surfaces or to vacuum water or other liquids – electric shock could occur. • Do not lubricate any parts, or carry out any maintenance or repair work other than that shown in this Operating Manual, or advised by the Dyson Helpline. PLEASE NOTE: • This vacuum is intended for household use only. • Fine dust such as plaster dust or flour should only be vacuumed in very small amounts. • Do not use the vacuum to pick up sharp hard objects, small toys, pins, paper clips, etc. They may damage the vacuum. • If used in a garage, care should be taken to wipe the soleplate and wheels with a dry cloth after vacuuming to clean off any sand, dirt, or pebbles that could damage delicate floors. • Consult your flooring manufacturer’s recommended instructions before vacuuming and caring for your flooring, rugs, and carpet. Some carpets will fuzz if a rotating brush bar is used when vacuuming. If this happens, we recommend vacuuming in bare floors mode and consulting with your flooring manufacturer. • When vacuuming, certain carpets may generate small static charges in the clear bin TM. These are entirely harmless and are not associated with the mains supply. To minimize any effect from this, do not put you hand or insert any object into the clear bin™ unless you have first emptied it and rinsed it out with cold water (see ‘Clear binTM cleaning’ section). CARPET SETTINgS ANd bARE FlOORS The vacuum will always default to the ‘Med pile’ setting when it is switched on and reclined. To change floor settings, press the button which best describes the floor type you are vacuuming whilst the vacuum is switched on. To vacuum with the brush bar turned off (eg. For bare floors or delicate rugs / carpets), ensure the ‘Bare floor’ mode is activated prior to reclining the machine. A constant white light indicates the chosen setting has been activated. FOR ThE bEST ClEANINg PERFORMANCE dYSON RECOMMENdS ThE FOllOWINg ClEANER SETTINgS: Setting Carpet/floor type Deep pile Plush, multi-styles and shag Medium pile Level-loops and lighter plush Short pile Commercial grade carpets and Wilton styles Bare floor Delicate rugs/carpets, floorboards, tiling, laminates, vinyl, etc. Always follow your floor covering manufacturer’s recommended instructions. The brush bar on this vacuum can damage certain carpet types. If unsure, turn brush bar off in order to ensure proper operation. hIgh-REACh ClEANINg CAUTION: • Switch ‘OFF’ the vacuum before changing tools. • Powerful suction can cause the hose to ‘pull back’ – please take care. • Take extra care when vacuuming on stairs; do not work with the vacuum above you on the stairs. Do not put the vacuum on chairs, tables etc. • Ensure the vacuum is in the upright position before using tools. PLEASE NOTE: • To release the wand, open the wand cap and pull the red tube until the wand releases from the vacuum. Tools can be attached to either the hose or wand. • The brush bar will not rotate when the vacuum is in an upright position. • Ensure wand cap is closed when not in use. ClEAR bINTM EMPTYINg CAUTION: • Switch ‘OFF’ the vacuum and unplug before emptying the clear bin TM. PLEASE NOTE: • Empty as soon as the dirt reaches the level of the MAX mark – do not overfill. • To remove clear bin TM, press red button under the red power button. Press same button again firmly to empty. • Do not use the vacuum without the clear bin TM in place. • Emptying inside a bag is recommended for allergy sufferers. ClEAR bINTM ClEANINg • To remove clear bin TM, press red button under the red power button. Press same button again firmly to empty. • A grey release catch is exposed at back of the clear bin TM. Press and hold grey button while holding handle. Pull and twist cyclone away. • To replace cyclone unit onto the clear bin TM, align grey butto...