Assessments - 4, GPA: 4.5
(
)
)
|
Facilidade de uso
Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Important Safety Instructions In this manual, on the labeling, and all other information provided with this product: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE is used to address practices not related to personal injury. CAUTION, without the safety alert symbol, is used to address practices not related to personal injury. Read All Instructions Personal Safety Dress Properly - Do not wear loose 1. clothing or jewelry. They can be caught in moving parts. Use of rubber gloves and substantial footwear is recommended when working outdoors. Wear protective hair covering to contain long hair. Wear ANSI-approved dust 2. mask/respirator when vacuuming to prevent injury resulting from possible dust inhalation. 3. Wear ANSI-approved safety goggles and heavy-duty work gloves. Do not Overreach - Keep proper footing and balance at all times. Stay Alert - Watch what you are 4. doing. Use common sense. Do not operate Tool when you are tired. 5. Wear thick jeans and steel-toed work boots to help prevent injury caused by flying debris. Read and adhere to all safety 6. precautions provided by the manufacturer of your dust collection system. Rolling Sweep Use and Care Keep Children Away - All visitors 1. should be kept at a distance from work area. When servicing use only identical 2. replacement parts. Use Right Tool - Do not use Tool for 3. any job except that for which it is intended. Do not Force Tool - It will do the 4. job better and with less likelihood of injury at the rate for which it was designed. Store Idle Tools Indoors - When not in 5. use, Tools should be stored indoors in dry, and high or locked-up place - out of reach of children. Maintain Tool With Care - Keep tool 6. maintained to reduce the risk of injury. Follow instructions for lubricating and changing accessories. Keep handles dry, clean, and free from oil and grease. Check Damaged Parts - Before 7. further use of the Tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by a qualified technician unless indicated elsewhere in this manual. Save these instructions. Specifications Hose Size Accepts 4” Dust Collector Hose Nozzle Size 20” Wide Dimensions 57” L x 20” W Unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. Set Up Instructions Read the entire Important Safety Instructions section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Functions This tool can be used to vacuum dust 1. and small debris from a shop floor, when a 4” flexible hose (not included) from the shop dust collection system is attached. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Assembly Upper Handle Section (13) must be 1. attached to Lower Handle Section (8) prior to use. Insert Upper Handle Section (13) into 2. Lower Handle Section (8) and fasten together using Phillips Head Screw (15). Operating Instructions Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Before operating the Rolling Sweep, 1. put on ANSI-approved safety goggles and other safety gear which are sold separately. To Attach a Flexible Vacuum Hose The Swivel Connecting Tube (5) is 1. designed to accept a standard 4” flexible collection hose (not included). Insert your flexible hose into the Con2. necting Tube (5). If necessary, use a band clamp or adapter (not included) to secure the hose. Operating the Sweep The Handle Assembly (8, 13) is de1. signed to swivel on the Connecting Tube (5). To adjust the swivel angle, loosen 2. the Knob (4), move the Handle to the desired position, and retighten the Knob. The Supporting Tube (11) provides 3. support by pushing ...