Assessments - 11, GPA: 3.9
(
)
)
|
Fotos e especificações Thomas Super 30S Aquafilter |
Facilidade de uso
Secure the motor block (2) by means of both snap-on fasteners (3). Applications You are now the owner of one of the most efficient and versatile appliances available, which can easily be adapted for any one of its four cleaning functions. The THOMAS SUPER 30 S Aquafilter can be used as a vacuum cleaner for cleaning carpets, upholstery, smooth floors and for regular household care; it can vacuum dirt as well as liquids, e.g. it can clear blocked sinks and drains. With only a few simple accessories, it can be used for shampooing your carpets or upholstery. The THOMAS SUPER 30 S Aquafilter is a multi-purpose product. In conjunction with the cleaning solution, the spray-extraction function enables you to clean carpets, upholstery and hard floors. The window-cleaning nozzle also renders it suitable for cleaning windows. The wet vacuuming mode is suitable for picking up water-based liquids only and it should never be used for vacuuming inflammable liquids. As a vacuum cleaner, it is intended for the removal of dry dirt and dust from carpets, floors, furniture and curtains. Unpacking the appliance Unpack the appliance from the carton, remove any packaging and identify the following parts and functions in the diagrams at the beginning of this booklet to gain a better understanding of the instructions given below. The letters indicated below refer to the diagrams on pages 4 and 6. Assembly instructions The parts required for the chassis are to be found loosely packed in the carton. Connecting the flexible hose Insert the flexible hose (13) in the suction socket (8) in such a manner that the markings on both the suction socket and the hose connecting piece correspond and the button clicks into place. Then attach the desired accessories. Remove the hose by turning the hose connecting piece and slowly with drawing the hose. Suction tube holder The suction tubes (14) complete with accessories and flexible hose (13) can be hooked into the fixtures at the back of the appliance. Cable storage (G After use, the mains cable (10) can be wound loosely in the hand and hung over the notch in the carrying handle, as shown in the illustration. Motor protection filter /J After each wet suction and spray extraction process, check the motor protection filter (33) for contaminations and clean if required. For this, open the float valve (38) in the direction of the arrow, and take the motor protection filter from the suction opening. Replace the cleaned or new filter and then put the float valve back in place. Concentrated cleaning solution Your THOMAS SUPER 30 S Aquafilter contains 0.5 l of Protex cleaning concentrate. Please see bottle label for instructions for use and dosage. Assembling the castor wheels ®Undo the snap-on fasteners (3) and lift off the motor block (2). © Take out the extraction liquid tank (28) and cleaning solution. Turn the collecting bin (1) upside down, i.e. with the opening facing the floor. To facilitate assembly, we recommend lightly greasing the pegs at both ends. First insert the pegs (30) in the base of the collecting bin (1), then push them in, together with the castors (4), as far as they will go. Turn the collecting bin (1) back over onto the castors (4) and check that these have been correctly assembled by moving the collecting bin (1) back and forth in all directions. 13 Dry vacuuming Wet vacuuming A Never use your AQUAFILTER appliance in dry vacuum mode without the Aquafilter, the fine particle textile filter, tissue filter and an appropriate water level. Do not vacuum up large quantities of particle dust, e.g. flour, cocoa powder, cement, etc. Preparation (A Remove the motor head (2) with the cable disconnected from the mains plug. 8 Remove fresh water tank (28). Press the suction hose (37) fitted to the motor head (2) in the holder (36) provided for this purpose. (H Fit tissue filter (26) by means of the clamping ring (25) and fasten with turning clips (31). Connect up the three-piece AQUA filter, pushing it together until the two parts fit snugly, and push it firmly onto the suction socket. Note the marker guides! The AQUA filter has to snap into place on the floor of the suction canister and has to lie there evenly. Fill 2 litres of clear water into the collecting bin. Hang the fine particle filter in the collecting bin by turning down the top edge. Mount motor head (2). The rotary switch on the appliance must be set to "0". A G Connect up mains connection cable (10). To put into operation Switch on appliance (M The rotary knob (7) must be set to the carpet nozzle symbol when dry vacuuming. The pilot lamp (6) should not be lit up. Appliance is ready to use. Cleaning and care of the AQUA filter system A For reasons of hygiene, empty, clean and dry the AQUAFILTER system and the collecting bin after each use. Dirty water and damp parts will promote the growth of bacteria and mildew. Assembly (A Remove the motor head (2) after connection cable...