Assessments - 3, GPA: 4 ( )

Fabricante : LG Arquivo Tamanho: 396.83 kb Arquivo Nome : Língua de Ensino:

(depending on model) • Take hold of the dust bag by the handle and pull. Remove the bag and throw it away. • To refit a new bag push the cardboard support of a new bag into the bag mount (25) until it will go no further. If your appliance is fitted with a fabric dust bag follow the same instructions as above. Empty it and replace it (26). Do not wash it. Note: as the appliance is fitted with a safety device which checks that the bag is in place you cannot close the lid if the bag is not fitted correctly. Cleaning the motor filter The motor filter is situated inside the ap-pliance between the dust bag and the motor. Each time that you change the air outlet filter we advise you to remove the motor filter (27) and to clean it by tapping to remove the dirt and then replacing it in the vacuum cleaner. Changing the air outlet filters Depending on the model you have chosen your appliance is equipped with different types of filters : foam filter or electrostatic filter or antiodour charcoal filter (28). • To change these filters remove the cover of the filter compartment(29) situated at the rear of the appliance, by lifting the little catch. • The foam filter, should be cleaned regular-ly by tapping it to remove the dirt. • The electrostatic filter or anti-odour charcoal filter should be changed regular-ly (approximately every 6 bag changes) What to do if your appliance does not work Check that the appliance is correctly plugged in and that the electrical socket is working What to do when the suction performance reduces? • Stop the appliance and unplug it. • Check that the tubes, flexible hose and cleaning tool are not blocked. • Check that the dust bag is not full. Replace if necessary. • Check that the air outlet filter is not blocked. Replace if necessary. 5 SAVE THESE INSTRUCTIONS The serial number is found on the bottom of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Date of purchase - Dealer purchased from Dealer address Dealer phone No. _ Model No. _ Serial No. TROUBLE SHOOTING CHART Review this chart to find do-it-yourself solutions for minor performance problems. WARNING : Disconnect power supply before servicing and/or cleaning the unit as electrical shock could occur and/or the cleaner could suddenly start. Problem Possible Cause Possible solution Cleaner won't run 1. Unplugged at wall outlet. 2. Power control S/W is in "OFF" position. 1. Plug in firmly 2. Push switch button. 3. Regulate power control switch. Poor suction 1. Full or clogged filter bag. 2. Clogged clean filter. 3. Worn universal nozzle brush. 4. Hole in hose. 5. Clogged universal nozzle. 6. Filter cover open. 1. Change the filter bag. 2. Change the clean filter. 3. Change brush. 4. Replace hose. 5. Clean the air passage of nozzle. 6. Close filter cover. * The working life of this set is 7 years since date of d...

Baixe o seu

Para fazer o download, introduza 2 dígitos :