|
Facilidade de uso
Please do not use force! ■ Do not vacuum flammable or explosive substances(liqulds or gases). ■ Do not vacuum hot ash, embers etc. nor sharp objects. ■ Do not vacuum water or other liquids. ■ Please make sure when using the carrying starp that It is securely fitted. ■ When you vacuum with an attachment appliance that has a rotating brush roller: * do not reach into the running brush roller. ■ Do not vacuum fine dust. ■ Do not expose vacuum cleaner to heat. Important for users in the UK. The wires in the mains lead of this appliance are coloured in accordance with the following code: BLUE-neutral BROWN - live As the colours of the wires In the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, PROCEED AS FOLLOWS: The wire which is coloured BROWN must be connected to the terminal which Is marked L or coloured RED. The wire which is coloured BLUE must be connected to the terminal which Is marked N or coloured BLACK! VERY IMPORTANT: Neither wire is to be connected to the earth terminal of a 3 pin plug. If a 13 amp plug Is fitted, fit a 13 amp BS 1362 fuse. If any other type of plug Is used, protect with a 15 amp fuse at the distribution board. For appliances which come with mains lead and plug moulded on : the plug moulded on to the cord incorporates a fuse. For replacement use a 13 amp BS 1362 fuse. Only ASTA approved or certified fuses should be used. The fuse cover/carrier must be replaced In the event of changing the fuse. The plug must not be used If the fuse cover/carrier Is lost. A replacement cover/ carrier must be obtained from authorised electrical goods retailers. WARNING! Should it become necessary to replace the moulded on plug then the detective plug should be destroyed to avoid any possible shock hazard that could occur should such a plug be inserted into a 13 amp socket elsewhere In the house. How to Use Connecting the flexible hose Insert the hose holder (1) into the suction opening. When the hose (2) is to be disconnected from the appliance, press the release button (3) and pull the hose holder out of the suction opening. Assembling the tubes ■ Telescopic tube (4) - Hold spring latch (5) - Pull out the tube to required length. - Release spring latch to lock. Using the cleaning head and Accessory Nozzles Fit the large cleaning head onto the end of the tube. * The 2 position head (6) is equipped with a pedal (7) which allows you to alter its position according to the type of floor to be cleaned. Hard floor position(tiles, parquet floors...), slide on the lever to lower the brush. Carpet or rug position, slide on the lever to lift brush up. -4- Ie Turbine brush nozzle (23) - Air adjustment (24) Slide the air control lever to the right for long pile carpet and to the left for ...
Este manual também é adequado para os modelos :Aspiradores - V-C444*** (3.4 mb)
Aspiradores - V-C446*** (3.4 mb)