Assessments - 3, GPA: 3.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Only when the handy cleaner is assembled, does the stick ON/OFF when th cleaner work. (For assemblying the handy cleaner: See page 7). 2. When you use the stick cleaner, turn the handy cleaner power off. Countermeasure when the stick cleaner is not turned off. • Check if the handy cleaner is on. You can only turn the stick cleaner on or off when the handy cleaner power is turned off. CAUTION USING THE POWER BRUSH • Since you can change the direction of the power brush by moving the handle of the stick cleaner left or right, cleaning is much easier. • When you clean the floor right in front of the wall, the front shutter is activated so that you can clean the dust easily. USING THE HANDY CLEANER_ 1. Lift the button to separate the handy cleaner and separate the handy cleaner from the main body by pulling it in the direction of the arrow. 10_ operating 2. Handy Cleaner On / Off • When the power button is pressed, the operation alternates between A CAUTION 1. Connect the handy cleaner to the main body after using it. (See page 7). 2. When you connect the handy cleaner to the main body, make sure to turn the handy cleaner off. USING THE CREVICE / DUSTING Insert crevice/dusting into the end of the air inlet on the handy cleaner to install it. To remove it, simply pull it out. • After using it, please store it in the crevice/dusting cradle of the charger so that you do not lose it. (See page 5). • Crevice : Use this to clean the dust from the grooves of window frames, corners or gaps. • Dusting : Use this to clean the dust from the grooves of windows, corners or gaps. EMPTYING THE DUST BIN 1. If the dust bin is full or the sucking power decreases, empty the dustbin. 2. Press the [buttons to separate the dustbin] with your thumb and middle finger and then pull it out. 3. Lift the dust bin cover. operating _11 02 OPERATING operating the cleaner 4. Empty the dust bin. 5. Close the dust bin cover. 6. Push the dust bin down until it “clicks” into place. 12_ operating maintain tools and fiter CLEANING THE FILTER 1. Press the [buttons to separate the dustbin] with your thumb and middle finger and then pull it out. 11 Wflp 1 tf Of 2. Lift the dustbin cover. 0 3. Hold the dust bin cover and separate the grill filter and the micro filter from the dust bin cover by pulling them and pressing the grill filter fixing hook. 4. Shake the dust from the filters and then wash the hepa filter until it is clean. 5. Dry the filter completely in a well-ventilated, shady location. 6. After assemblying the micro filter and the grill filter, hook one side of the grill filter and push the fixing hook of the dust bin cover down until it clicks into place. 7. Assemble the assembled dustbin cover and the dust bin. |=| Add a neutral detergent and the filter into warm water and leave it for 30 minutes. NOTE This will wash the filter more effectively. maintain _13 03 MAINTAIN maintain tools and fiter A Maintaining the filter • Do not dry it near a microwave or fire. N •Do not clean it by putting it into a washer or using an unapproved detergent. (See page 5). • After cleaning, dry it completely in the shade. - If you use the filter when it is not completely dried - Moisture or water may enter the motor and cause a problem. - The dust and moisture in the inlet solidifies and this drastically decreases the sucking power. - The filter may smell. • Dry the part in the shade as drying it in the sun for a long time may deform or discolor it. COUNTERMEASURE TO REMOVE ANYTHING CLOGGING THE CLEANER_ • To prevent clogging while using the cleaner, avoid vaccuuming big or sharp objects such as toothpicks, blades, socks, etc. • If the cleaner is clogged while in use, the sucking power may decrease and a vibrating sound may be heard. In this case, remove the item clogging the product. • If a foreign object is caught while you use the product, the drum will not rotate. In this case, turn the power of the cleaner off and remove the object. • Since the safety device is activated in this case, please operate the product again after about 10 seconds. 1. Press the button to separate the air inlet and then separate the air inlet from the main body. 2. Press the air inlet cover fixing hook and separate it. 3. Hold the end of the drum where there is no belt and lift it up. 14_ maintain 4. Remove any hairs and threads around the drum with a 6. After fixing the drum, insert the air inlet cover into the groove and assemble it by slightly sliding it down. Since an oil-papered or wood-covered floor may be scratched by the cleaner, please check the type of wheels of the air inlet. If you cannot remove foreign objects from the cleaner, please contact a service center. maintain _15 NOTE 03 MAINTAIN troubleshooting PROBLEM SOLUTION Motor downs and does not start. • Check cable, plug and socket. • Leave to cool. Suction force is gradually decreasing. • Check for blockage and remove. Low or decreas...
Este manual também é adequado para os modelos :Aspiradores - SC7555 (6.23 mb)
Aspiradores - SS7555 (6.23 mb)