Log:
Assessments - 4, GPA: 4 ( )

Instruções de Operação LG, Modelo V-C9462WA

Fabricante : LG
Arquivo Tamanho: 691.14 kb
Arquivo Nome :
Língua de Ensino: en
Fotos e especificações  LG  V-C9462WA
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso


If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner. Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch. If the vacuum cleaner still does not run, contact a qualified electrician. – 3– – 4 – 1 2 3 1 1 2 2 4 5 6 7 8 9 10 11 1 2 3 1 2 – 5 – 12 13 14 15 16 17 18 19 20 21 22 23 Clip ON OFF Separation-button Connector 2 1 Safety device – 6 – Red mark Yellow mark 25 26 24 27 29 30 32 28 31 33 34 35 2 1 3 1 2 Dusting brush Crevice tool Upholstery nozzle Cloth filter Shampoo bottle Handle Power cord Power switch button Shampoobutton ShampootankClamp Cover assy Outlet cap Shampoo tank cap Cord reel button Inlet dust Floor nozzleSpray nozzle Hose handle Hose Pipe TankValve Window Master Small Shampoo Nozzle Handle Power cord Power switch button Shampoobutton ShampootankClamp Cover assy Outlet cap Shampoo tank cap Cord reel button Inlet dust Floor nozzleSpray nozzle Hose handle Hose Pipe TankValve Window Master Small Shampoo Nozzle – 7– OPERATING INSTRUCTION Preparation Before Using • Connect the hose with the tank: Insert the end of the hose into the opening of the tank, and turn it right.(Fig. 1) • Connect the outlet cap with the valve: Connect the outlet cap with the valve, and turn it right.(Fig. 1) • Connect the pipe with the hose handle: There are two pipes. Connect the pipe which dose not have the pipe holder.(Fig. 2) • Connect the other pipe.(Fig. 3) • Connect the nozzle with the pipe: Connect the nozzle which you want to use with the pipe. (Fig. 4) NOZZLE • Floor nozzle: Use it to clean the dry dust. You can use it to clean a carpet(without brush) and a tile(with brush).(Fig. 5) • Spray nozzle: Use it to suck water or to do a shampoo cleaning. You can use it to clean a carpet(without brush) and a tile(with brush).(Fig. 6) ACCESSORY You can use all of accessories with a pipe or directly with a hose handle. • Upholstery nozzle: Use it to clean upholstery such as furniture, curtain, etc.. • Crevice tool: Use it to clean a crevice such as window frame, door crevice, etc. • Dusting brush: Use it to clean some where difficult to reach such as inside of lampshade, shelf, etc. How to use Cleaning a dry dust • Open the cover, and check whether the inside of the tank is empty or dry.(Fig. 7) If not empty, make the tank completely empty and make it dry. • Insert the cloth filter(Fig. 8), and closer the cover.(Fig. 9) • Insert the floor nozzle.(Fig. 4) • Connect the plug, and press power button.(Fig. 10) Making the cloth filter empty When the filter becomes to be full, the suction power becomes to weak, and you can not do the cleaning any more. Then, clean the cloth filter. With the power off, open the cover and remove the filter.(Fig. 11) Slide out the clip of the filter(Fig. 12), clean the filter, and reinstall the clip again. Sucking water • Open the cover, and check whether the cloth filter is installed at the tank or not. If installed, remove the filter. • Insert the spray nozzle.(Fig. 13) • Insert the tube into the holder of the pipe, and insert the clip into the pipe.(Fig. 13) • Insert the connector on the top of the tube into the trigger of the hose handle.(Fig. 14) • When disconnecting the connector, press the remove button of the trigger.(Fig. 14) • Connect the plug, and press the power button. • You can suck water only with the hose handle after removing the pipe from the hose handle.(Fig. 15) – 8– Make the tank empty When the water in the tank goes to the specific level, the safety device works to prevent the water from sucking.(Fig. 16) Then, make the tank empty. With the power off, turn the hose connected with the tank to the left to be removed.(Fig. 17) Open the cover, and disconnect the tank from the main body. Make the tank empty (Fig. 18), and reassemble it. Shampoo cleaning • Do the dry dust cleaning. • Open the cover, and remove the filter from the tank. • Remove the floor nozzle from the pipe, and insert the spray nozzle. • Insert the tube into the holder of the pipe, and insert the clip into the pipe. • Insert the connector on the top of the tube into the trigger of the hose handle. • When you disconnect the connector, press the remove button of the trigger. • Open the shampoo cap, and fill the shampoo tank with the appropriate ratio of water and shampoo.(Fig. 19) Read the appropriate ratio value on the shampoo. • Connect the plug, and press the shampoo button.(Fig. 20) • Pull the handle of the hose handle, then the shampoo is sprayed at the spray nozzle.(Fig. 21, 22) • Spray the shampoo evenly over the area to be cleaned, and press the power button to suck the sprayed shampoo. At this time, you should pull to clean toward your body. If you push to clean, you can not suck the shampoo.(Fig. ...

Este manual também é adequado para os modelos :
Aspiradores - V-C9451WA (691.14 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias