Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
You can store two accessories at a time in the accessor y holder. -Crevice tool and small nozzle. Note:The small nozzle must be placed in the accessory holder as shown in the picture. -Crevice tool and small brush. using the appliance 1 2 Pull the cord out of the appliance and put the mains plug in the wall socket. To switch on the appliance, press the on/off button on top of the appliance. Tip:To avoid bending your back, press the on/off button with your foot. 3 To switch off the appliance, press the on/off button on top of the appliance. 10 English adjusting suction power 1 During vacuum cleaning, you can adjust the suction power with the selection wheel on top of the appliance. -Use maximum suction power to vacuum ver y dir ty carpets and hard floors. -Use moderate suction power to vacuum carpets. -Use minimum suction power to vacuum cur tains, tablecloths etc. Note: By reducing suction power, you can move the nozzle across the floor more easily. Pausing during use 1 2 3 4 If you want to stop vacuum cleaning for a moment, press the on/off button on top of the appliance to switch off the appliance. Insert the ridge on the nozzle into the parking slot to park the tube in a convenient position. To ensure stable parking of the telescopic tube, adjust the tube to the shortest length. To continue vacuum cleaning, simply press the on/off button on topof the appliance to switch on the appliance. storage This vacuum cleaner has not one, but two carr ying handles. When it is on its wheels, there is a handle on top which enables you to move the vacuum cleaner around easily with ver y little bending.The second handle on the front side of the appliance enables you to comfor tably carr y it around in upright position. 1 Switch off the appliance and remove the mains plug from the wall socket. 2 Press the cord rewind button to rewind the mains cord. 3 Put the appliance in upright position.To attach the nozzle to the appliance, insert the ridge on the nozzle into the storage slot. -To ensure stable parking of the telescopic tube, adjust the tube to the shor test length. Tip:We advise you to wrap the hose around the tube to ensure stable parking and to save even more space when you store the appliance. Maintenance Always unplug the appliance before you clean the appliance, before you replace the dustbag and before you replace the filters. English 11 Dustbag Note: In some cases, the dustbag-full indicator can indicate that the dustbag is full, even though it is not.This may occur if the pores of the dustbag are clogged (e.g. when you have vacuumed ashes, fine sand, lime, cement dust and similar substances) or if something is blocking the nozzle, tube and/or hose. If the pores of the dustbag are clogged, you have to replace the dustbag, even if it is not full yet. If the dustbag is not clogged but not full either, something is blocking the nozzle, tube and/or hose. In this case, do not replace the dustbag but remove the obstruction. -Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e. even when the nozzle is not placed on the floor. 1 Pull the cover upwards to open it. 2 Lift the dustbag holder out of the appliance. Make sure you hold the holder with the dustbag in horizontal position when you lift it out of the appliance. 3 Pull at the cardboard tag to remove the full dustbag from the holder. When you do this, the dustbag is sealed automatically. , You can dispose of the full dustbag with the normal household waste. , 4 Slide the cardboard front of the new dustbag into the two grooves of the dustbag holder as far as possible. 12 English 5 First insert the front of the dustbag holder into the vacuum cleaner (1) and then press the back into the vacuum cleaner (2). Note: If no dustbag has been inserted, you cannot close the cover. 6 Push the cover downwards to close it. Motor protection filter To guarantee optimal performance, replace the motor protection filter once a year.You can dispose of the old filter with the normal household waste. 1 Remove the dustbag holder with the dustbag. 2 3 Press down the tab at the top of the motor protection filter holderto release it (1). Lift the filter holder out of the dustbag compartment (2). Put the new filter in the filter holder. 4 5 Fit the two lugs of the filter holder behind the ridge at the bottomto ensure that it fits properly at the top (1).Then press the filter holder home (‘click’) (2). Place the dustbag holder with the dustbag back into the appliance and close the cover. HePa 13 filter The HEPA 13 filter is able to remove 99.95% of all par ticles down to 0.0003mm in size from the outlet air.This not only includes normal house dust, but also harmful microscopic vermin such as dust mites and their excrements, which are well-known causes of respirator y allergies. Note:To guarantee optimal dust retention and performance of the vacuum cleaner, always replace the HEPA filter every 2 years with an original Philips filter of the correct typ...
Este manual também é adequado para os modelos :Aspiradores - FC9310/02 (15.45 mb)