Log:
Assessments - 0, GPA: 0 ( )

Instruções de Operação Philips, Modelo FC9062/01

Fabricante : Philips
Arquivo Tamanho: 5.61 mb
Arquivo Nome :
Língua de Ensino: ruplhrukenbgetslhuskcslvltro
Ir para baixar



Facilidade de uso


4). To disconnect the tube from the handgrip, press the spring-loaded lock button and pull the handgrip out of the tube. Note: Use the same method to connect and disconnect the accessories. telescopic tube (specific types only) 1 Adjust the tube to the length you find most comfortable during vacuum cleaning (Fig. 5). tri-active nozzle (specific types only) The Tri-Active nozzle is a multi-purpose nozzle for carpets and hard floors. -The side brushes catch more dust and dir t at the sides of the nozzle and allow you to clean better along furniture and other obstacles (Fig. 6). -The opening at the front of the nozzle allows you to suck up larger par ticles (Fig. 7). To clean hard floors, push the rocker switch on top of the nozzle with your foot (Fig. 8). 8 English The brush strip for cleaning hard floors comes out of the housing. At the same time, the , wheel is lifted to prevent scratching and to increase manoeuvrability. 2 To clean carpets, push the rocker switch again (Fig. 9). The brush strip disappears into the nozzle housing and the wheel is lowered automatically. , Combination nozzle (specific types only) The combination nozzle can be used on either carpets or hard floors. 1 To clean hard floors, push the rocker switch on top of the nozzle with your foot (Fig. 10). The brush strip for cleaning hard floors comes out of the nozzle housing. ,2 To clean carpets, push the rocker switch again (Fig. 11). The brush strip disappears into the nozzle housing. , Crevice tool, small nozzle and small brush 1 Connect the crevice tool (1), the small nozzle (2) or the small brush (specific types only) (3) directly to the handgrip or to the tube (Fig. 12). accessory clip (specific types only) 1 2 Snap the crevice tool and the small nozzle into the clip. Snap the accessory clip onto the tube (Fig. 13). accessory holder (specific types only) 1 2 Snap the accessory holder onto the handgrip (Fig. 14). Snap two accessories into the accessory holder: -Crevice tool and small nozzle (Fig. 15). Note: Make sure the suction opening of the small nozzle points away from the holder. -Crevice tool and small brush (Fig. 16). Note: Make sure the suction opening of the small brush points towards the holder. usingtheappliance Pull the cord out of the appliance and put the mains plug in the wall socket. Press the on/off button on top of the appliance with your foot to switch on the appliance (Fig. 17). During vacuum cleaning, you can adjust the suction power with the knob on top of the appliance (Fig. 18). 1 2 3 -Use maximum suction power to vacuum ver y dir ty carpets and hard floors. -Use minimum suction power to vacuum cur tains, table carpets, etc. 4 If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to park the tube in a convenient position (Fig. 19) activeFragranceControl(specifictypesonly) The scent granules have been specially developed for use in your Philips vacuum cleaner. Only use the Philips s-fresh ` scent granules in your vacu...

Este manual também é adequado para os modelos :
Aspiradores - FC9060/01 (5.61 mb)
Aspiradores - FC9073/01 (5.61 mb)
Aspiradores - FC9078/01 (5.61 mb)
Aspiradores - FC9074/01 (5.61 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias