Assessments - 0, GPA: 0 ( )

Fabricante : Bosch Arquivo Tamanho: 9.14 mb Arquivo Nome : Língua de Ensino:

Worn undersides of floor tools may have sharp edges that can damage sensitive hard floors, such as parquet or linoleum. The manufacturer does not accept any responsibility for damage caused by worn floor tools. Figure 10 Adjusting the floor tool: Rugs and carpets => hard floors => Figure 11 ... Remove the crevice nozzle or upholstery nozzle from the accessories compartment in the appliance lid. Figure 12 Vacuuming with accessories Attach the nozzles to the suction pipe or handle as required: a) Crevice nozzle for vacuuming crevices and corners, etc. b)Upholstery nozzle for vacuuming upholstered furniture, curtains, etc. c) Hard-floor tool For vacuuming hard floor coverings (tiles, parquet flooring, etc.) ... Push the telescopic tube into the connecting piece of the hard floor tool until it locks in place. ... To release the connection, press the locking collar and pull out the telescopic tube. Figure 13 ... After use, place the crevice or upholstery nozzle back into the accessories compartment in the appliance lid. Turbo brush If your appliance is equipped with a turbo brush, please consult the accompanying instruction manual for instructions on its use and maintenance. Figure 14 ... You can use the nozzle parking aid on the back of the appliance if you wish to stop vacuuming for a short time. ... Once you have switched off the appliance, slide the hook on the floor tool into the recess on the rear of the appliance. Figure 15 To overcome obstacles, e.g. steps, the appliance can also be carried by the handle on the appliance body. When you have finished vacuuming Figure 16 ... Pull out the mains plug. ... Briefly pull the power cord and release (The power cord rewinds automatically). Figure 17 ... To store or transport the appliance, you can use the storage aid on the underside of the appliance. ... Stand the appliance upright. Slide the catch on the floor tool into the groove on the underside of the vacuum cleaner. Changing the filter ! ! Please note: Always switch off the appliance before changing the filter. Replacing the bag Figure 18* a) If the dust bag change indicator lights up red continuously when the floor tool is lifted from the floor and the highest power setting has been selected, the dust bag must be changed, even though it may not yet be full. Even if the dust bag is not full, it may still need changing, due to the type of dust which has been vacuumed. First check that the nozzle, suction pipe and flexible hose are not blocked, as this would also lead to the dust bag change indicator being triggered. b)The handle can easily be detached from the hose to remove blockages. Figure 19 Opening the lid ... Open the lid by moving the locking lever in the direction of the arrow. Figure a) Seal the dust bag by pulling the sealing tab, and 20 ! ! remove the bag. b)Insert the new dust bag fully into the holder. Caution: the lid will only close if a dust bag has been inserted. *depending on model Cleaning the motor protection filter The motor pr...

Baixe o seu

Para fazer o download, introduza 2 dígitos :