Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
ACUUM CLEANER RC-300 RC-300(. -DESUK) 99.9.23 8:28 PM .` 1 CONTENTS •Description and operation .....2,3 •Cleaning the filter and Changing the dustbag ...............4 •Precautions for safe use.............5 •Specifications............................6 •Before asking for service ...........6 .......................................... ACUUM CLEANER RC-300 RC-300(. -DESUK) 99.9.23 8:28 PM .` 1 RC-300(. -DESUK) 99.9.23 8:29 PM .` 2 DESCRIPTION AND OPERATION 2 • The suction power control at the hand grib enables you to control suction power. SUCTION POWER CONTROL • To Connect the nozzle, hold the tubes and the handle:insert the narrowed section into the wide section. PIPE CONNECTION • Use this nozzle for cleaning both carpeted and uncarpeted floors. WIDE SUCTION NOZZLE UPHOLSTERY NOZZLE CREVICE NOZZLE DUS HOSE CONNECTION • Connecting the hose : insert the hose firmly into the hose inlet. (“Click”) • Disconnecting the hose: press the button and pull hose out of the vacuum cleaner. • This part can be separated from the tube when taking a nozzle out of it. 3 • If you want to stop vacuum cleaning for a while, you can place the brush clip into the rest. PRACTICAL PARKING • If you want to store the cleaner, hitch the brush clip onto the vacuum cleaner. STORAGE • When the color of the dust meter is changed to RED for long time, change the dust bag. DUST METER • Rewind the power cord by pressing the cord rewind button. CORD REWIND BUTTON • Press the on/off switch. ON/OFF SWITCH DUSTING BRUSH hose: and pull the cuum rest brush clip DUST METER RC-300(. -DESUK) 99.9.23 8:29 PM . ` 3 4 • If you cannot purchase the RC-300/RC-350 dust bag, Please note you may use the dust bag for the Philips Model No HR6938 OSH. CHANGING THE DUSTBAG CLEANING THE FILTER • Switch off and open the cover. • Switch off and lift the handle. • Pull the filter case upwards from the cleaner. • Hold the cover while taking the filter out of the cleaner. • Shake the dust out of the filter. • Separate the filter from the filter case and shake the dust out of the filter. • Hold the cover while separating the dustbag from the dustbag holder. • Insert the new dustbag in the dust bag holder properly as shown in picture. Note: If no dustbag has been placed into the dustbag holder, the cover cannot be closed. • Switch off and open the cover. EXHAUST FILTER MOTOR PROTECTION FILTER RC-300(. -DESUK) 99.9.23 8:29 PM . ` 4 RC-300(. -DESUK) 99.9.23 8:29 PM . ` 5 PRECAUTIONS FOR SAFE USE This vacuum cleaner should only be used for normal dry household dust and dirt. The manufacturer cannot be responsible for any damage caused by use or operation of the cleaner contrary to these instructions. If the cleaner is wrongly operated for a purpose other than that for which it is intended, no liability can be accepted for any possible damage. • Do not vacuum areas which contain moisture or water and inflammable matter, needles, pins, razor blades, matches, cigarette-ends, etc., since they may damage the cleaner or dust bag or make a fire. • Make sure a dust bag and a motor protection filter are always inserted. • When rewinding the power cord, hold the plug body before pressing the cord rewind button to prevent whipping. • Do not pull the power cord out beyond the specified length. • This product provided with a cable which, if damaged, must be replaced by a repair shop authorized by the manufacturer since special tools are required. 5 55 RC-300(. -DESUK) 99.9.23 8:29 PM .` 6 BEFORE ASKING FOR SERVICE n Before Asking for Service, please check each item below if you have trouble with your cleaner. Problem Check Point Measure Suction power is weak. • Dust bag • Pipe or hose If dust bag is dirty, replace it. If clogged or blocked, remove the object. The cleaner does not work. • Power cord • ON/OFF switch Check if power cord is plugged. Check if the power switch is turned on. Power cord does not rewind. • Power cord Pull the power cord out a little and press the cord rewind button. When the dust bag is full or blocked or any of the accessories is blocked, the over-heating protection for the motor is activated. Switch off and unplug the cleaner and check the dust bag, accessories and blockages, then allow the motor to cool down. The cleaner can be switched on again after about 30 minutes. SPECIFICATIONS Model RC-300 Rating 230V/50Hz Watts 1100W MAX.1200W Weights(Net) 5.0kg Dimension (L X H X D) 354 X 240 X 262mm Cord Length 6m • Specifications can be changed for improvement without notice. 6 66 ...