Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
When pluging or unpluging, hold the plug body, not flex. • Do not vacuum inflammable materials, needles, pins, razor blades, etc. • Do not vacuum without a dust bag. If no dust bag, the dust cover would not be closed completely. • Keep the unit away from heat sources such as a heater. si • Do not step on the hose or pull it fecibly. The hose may be flattened or torn. • This product is provided with a cable which, if damaged, must be replaced by a repair shop authorized by the manufacturer since special tools are repuired. • Do not vacuum dust which contains moisture/water. • When rewinding the power cord, hold the plug body before pressing the cord rewind button. The cord moves quickly and might hit you or other objects. €2i 4 How to Use 1. How to operate • Put together as shown on page 3. Description. • Plug the power cord into a 120V AC 60Hz ; receptacle outlet. • Set the remote control switch "ON". • O the vacuum cleaner will be vacuuming at this time. • If you continue to push the remote control switch, the air hole opens and the suction power decreases. .• O adjust the switch as needed for different cleaning jobs.- (How to operate the remote control switch) 2. How to change the dust bag 4 5 5. How to use the crevice nozzle 6. How to clean the filter. 6 7. How to store the vacuum cleaner Wind the hose around the hose handle as shown below. C> 7 Before Asking for Service ■ Before Asking for Service, please check each item below if you have trouble with your cleaner. Problem Check Point Measure Suction power is weak. • Dust bag • Pipe or hose If dust bag is dirty, clean it. If clogged or blocked, remove the object. The cleaner does not work. • Power cord • Suction hose Check if power cord is plugged. Check if hose is attached fimly into suction hole. Power cord does not rewind. • Power cord Pull the power cord out a little and press the cord rewind button. When the dust bag is full or blocked or any of the accessories is blocked, the over-heating protection for the motor is activated. Switch off and unplug the cleaner and check the dust bag, accessories and blockages, then allow the motor to cool down. The cleaner can be switched on again about 30 minutes. 8...