Assessments - 5, GPA: 4.4
(
)
)
|
Facilidade de uso
• For proper operation, please read this manual before using. CONTENTS •Names of parts and operation technique .........2 •Replacing the dust bag.....................................4 •Replacing the hepa filter ..................................4 •Empty the dust box ..........................................5 •Important safety instructions ............................6 •Before asking for service ..................................7 EXTENSION PIPE 2 3 NAMES OF PARTS AND OPERATION TECHNIQUE • Turn the unit off(on) by pressing the ON/OFF switch button on the unit. • Slide the knob to control the suction power.(RC-400B Series model) • IF RED : Dust bag(or dust box) is full. Change bag or clean dust box. • See the next page for instruction on replacing the dust bag or cleaning the dust box. • Insert nozzle holder in the clip which is built onto the unit. • Press the button in the direction shown by the arrows and pull(or push) the pipe. • Rotate the pipes in the direction shown by the arrows and pull pipes(or floor nozzle) apart. • If you slide the suction control on the hose, you can control the force required to push the floor nozzle. • Select the appropriate setting of the pedal according to the surface to be cleaned. Carpet Hard Floor Press Press • Press the button and pull the hose adapter out of the unit. Hose adapter Hose Button Lift Pull Motor protection filter PPPPPPPPPPPPPPPPPPPPPPPPPPPPrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrreeeeeeeeeeeeeeeeeeeeeeeeeeeeeesssssssssssssssssssssssssssssssssssssssssssssssssssssssssss Dust cover Press • Press the cord rewind button to rewind the cord. Cord Slide Slide Hose Pipe Pull(Press) Button Clip Clip Nozzle holder Nozzle holder Suction control PPPPPPPPPPPPPPPPPPPPPPPPPPPPrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrreeeeeeeeeeeeeeeeeeeeeeeeeeeeeesssssssssssssssssssssssssssssssssssssssssssssssssssssssssss PPPPPPPPPPPPPPPPPPPPPPPPPPPPrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrreeeeeeeeeeeeeeeeeeeeeeeeeeeeeesssssssssssssssssssssssssssssssssssssssssssssssssssssssssss • Lift the dust cover upward toward you and take out the motor protection filter. • Shake the filter to remove the dust. • Place the motor protection filter in the correct. • Press the dust cover firmly. FLOOR NOZZLE HANDLE RELEASE BUTTON CORD REWIND DUST INDICATOR ON/OFF SWITCH CLEANING THE FILTER PIPE/BRUSH CONNECTION STORAGE 4 5 REPLACING THE DUST BAG REPLACING THE HEPA FILTER(OPTIONAL) • Lift the dust cover upward toward you. and pull the hose adapter out of the unit. • Push the dust bag holder in the direction of the arrow mark and gently pull the used dust bag upward. Throw away the used dust bag. • Pull the hose adapter out of the unit and lift the dust cover upward toward you. • When releasing the dust cover, turn the hook to left. • Empty dirt into garbage container. • The dust box may be washed in water. Make sure it is completely dry before using again. • Please the dust cover down so that two catches. • Press the dust cover firmly and insert the hose adapter into the unit. • When positioning the dust bag over the dust bag holder, you place the hard board of the dust bag between the two guides and insert the lower part of it into the bottom of the holder. Push the dust bag holder in the direction of the arrow mark in the first position. Check to see that the dust bag holder is positioned properly in the unit. • Pull the filter cover toward you. • Lift the end of filter upward. and throw away the used filter. • Insert the end of new filter into the unit and press the filter cover toward unit. Dust cover Hose adapter Lift Used Dust bag Dust cover Hose adapter Hook Dust box Dust cover(Catchs) Dust box Hose adapter Push Dust bag holder Guides Filter Cover Filter Unit Pull Pull Press Press Right Lift Left Press Pull Lift Press Press Push Hard board of the new dust bag 2 3 1 1 2 3 EMPTY THE DUST BOX 2 3 1 5 6 4 BEFORE ASKING FOR SERVICE 6 7 Please check each item below if you have trouble with your cleaner. Before checking, ensure the cleaner is unplugged from the power supply. PROBLEM Suction power is weak The cleaner does not work. Power cord does not rewind. Power cord is not pulled out of the cleaner. CHECK POINT Dust bag Floor nozzle Hose,Pipe, Accessories Plug On/Off switch When the dust bag is full or openings are blocked, the over heating protection for the motor is activated automatically. Power cord SOLUTION If it is filled with dust,change it. Remove hair, string and lint build-up in the floor nozzle area. If clogged or blocked, remove the object. Plug in firmly, push On/Off switch to On. Switch off and unplug the cleaner and check the dust bag, openings and blockages. The cleaner can be switched on again after about 30 minutes. Pull the power cord out a little and press the cord rewind button. Do not pull it by force rewind it a little by pressing the cord rewind button and pull it out. • Do not use the cleaner to pick up sharp hard objects, small toys, pins, etc. They may damage the cleaner or dust bag. • Do not pick up an...