Assessments - 4, GPA: 5
(
)
)
|
Facilidade de uso
Power button: • Press and hold to turn the unit On/Off • Press to adjust contrast and backlighting Call button: • Press to send out Call Tone • Sends position when released (if enabled) Talk button: • Press and hold to talk • Sends position when released (if enabled) Page/Quit button: • Press to cycle through main pages • Used to quit or escape menu items Volume (V) button: • Press to open volume control window Speaker Step-by-Step Instructions to Get You Started (Turn this page and begin with Step 1) Thumb Stick • Press In to enter highlighted options and to confirm messages • Move Up, Down, Right or Left to move through lists, highlight fields, on-screen buttons, icons, enter data, or move the map panning arrow • Press In and hold to display Shortcuts Menu. Zoom/Map (Z) button: • From the Map Page, press to open Zoom control window • From any other page, press to display Map Page Microphone: • Hold unit 3–4 inches away when talking Part Number 190-00284-01 Rev. B 1 Installing the Batteries 2 Viewing the Main Pages 3 Initializing the GPS 5 Setting Up the Radio 7 Transmitting with the Rino 130 The Rino 130 operates on three “AA” Alkaline batteries (not All of the information you need to operate the Rino 130 can be Before the Rino 130 can be used for navigation, the GPS receiver Select a channel and squelch code to transmit on. Be sure to tell the The Rino 130 can transmit to and receive messages from other FRS included) located in the back of the unit. Rechargeable batteries may found on six default main pages (or display screens). Simply press must be initialized. Initialization allows the Rino 130 to receive other members of your group what channel and squelch code you radio users on the same channel and squelch code. To use all of the also be used. See the Rino 130 Owner’s Manual for setting battery and release the Page key to cycle through the Radio Page, Map and store satellite information and begin using the satellites for are using so they can communicate with you. features of the Rino, communicate with other Rino units. type. The unit is factory set to use Alkaline batteries. Stored data is Page, Navigation Page, Altimeter Page, Trip Computer, and Main navigation. The initialization is automatic and should only take a To select a channel: To transmit on your Rino 130: not lost when the batteries are removed. Menu Page. You can also access the Main Pages by pressing the few minutes. 1. Highlight the Channel field and press 1. Press and hold the Talk button and speak in a normal voice on-screen Main Page Menu button . the Thumb Stick In. into the microphone area on the front of the Rino 130 from a To install batteries: To initialize the unit (acquire satellites): distance of about 3–4 inches. 1. Take the Rino 130 outside where it has an unobstructed view 2. Select an available channel and press the Thumb Stick In to accept 1. Remove the battery cover on the back of the unit. Turn the 2. When you are finished talking, release the Talk button. Your of the sky and turn it on. the selection. D-ring 1/4 turn counter-clockwise and pull the cover off. location is updated on all receiving Rinos. 2. The unit begins to search for satellite signals. “Tracking Satel3. If you want to call another user or update your location on lites” is displayed while the unit is To select a squelch code: Selecting the channel another Rino, press and release the Call or Talk button. 1. Select the Code field and press the initializing. Thumb Stick In. The first time you use your Rino 2. Select one of the thirty-eight (38) Radio Page Map Page 130, initialization should take no 8 Adjusting Volume and Backlight Tracking Satellite Signals available codes. Press the Thumb more than five minutes. If you need to adjust the volume, press the V (Volume) button on Stick In to accept the selection. 3. When the GPS is initialized and ready for navigation, the 6 Changing the Name and Symbol the front of the unit to display an adjustment slider. To change the message “3D Accuracy” is displayed on the Radio Page. volume, press the Thumb Stick Up or Down to raise or lower the If for some reason the unit is not able to gather the necessary satel slider. When you have the proper level set, press the V button or lite information, refer to the Rino 130 Owner’s Manual. press the Thumb Stick In. The My ID (name) and symbol (icon) identify you to other Rino users. If lighting conditions make it hard for you to see the display screen, Main Menu Navigation Page 4 Entering Data you can adjust the contrast or turn on the backlight. To change the unit ID/name: Use the Thumb Stick like a joystick that you 1. Highlight the My ID field and press To turn on the backlight and adjust the screen the Thumb Stick In to activate the control with your thumb. Move the Thumb contrast: field and display the keyboard. Stick Up, Down, Right, or Left. Press the 1. With the unit on, briefly press and release the Power button 2. Insert batteries observing the polarity referen...