Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
This monitor will enable you to see and hear your baby from another room. The extra large 5.5" color display gives you an ultra clear, sharp picture. And its slim, lightweight design allows it to be placed or mounted almost anywhere in your home This monitor operates on a frequency of 900 MHz. It will not interfere with 2.4 GHz phones, wireless routers, microwaves, or other 2.4 GHz equipment. Please note, however, that there may be interference with cordless telephones that operate on a frequency of 900 MHz. Please read all the instructions carefully before operating this monitor and save this manual for future reference. If you have any questions, please call the BebeSounds® Help Desk toll free at 1-888-232-6476 Mon-Fri from 9:00AM-5:00PM EST. WARNING: This monitor is not intended to replace adult supervision of children. All children should be monitored at all times by responsible adults. This product is not a toy. Do not allow children to play with it. Keep out of reach of children. Contents: 1 Receiver 1 Camera 2 AC adapters 1 Audio/Video cable 3 Mounting screws and anchors 1 Mounting template 3 flg.1 Infrared Sensors Indicator Lights 4 fig.2 Light Sensor AC Adapter Jack AV Input Jack Power Switch Battery INSTRUCTIONS Camera You can power the camera with an AC adapter or batteries. For long periods of non-use, we suggest removing the batteries and unplugging the AC adapter. For AC power, insert the small AC adapter (labeled “Camera”) into the jack marked “9V DC” and plug the adapter into an electrical outlet. When using an AC adapter, we suggest you also keep batteries in at all times as the camera will automatically convert from AC to battery power during a power outage. However, if you do not keep batteries in the units, it will operate on just AC power. For battery power, the camera requires six AA alkaline or rechargeable batteries. Rechargeable batteries can be used, however, batteries will NOT be recharged in the camera by plugging in the AC adapter. If you are using rechargeable batteries, they will have to be removed and recharged by an external charger. Remove the battery cover. Insert six AA alkaline or rechargeable batteries (not included) matching positive (+) to positive (+) and negative (-) to negative (-) and replace the battery cover. The battery life is approximately six to eight hours. Replace the batteries in the camera when the Power Indicator Light turns orange. Receiver The receiver only works with an AC adapter. Insert the large AC adapter (labeled “Receiver”) into the jack marked “12V DC” and plug the adapter into an electrical outlet. For long periods of non-use, we suggest unplugging the AC adapter. 5 Using Your Monitor 1. Turn the camera and receiver on by sliding the Power switches to the ON positions. The green Power Indicator on the camera will light up when it is on. One of the Channel Indicators on the monitor will light up when it is on. 2. Make sure the switch on the camera is set to “camera.” 3. Rotate the camera head so it faces your baby. To install the camera on the wall, use the mounting screws and anchors with the mounting template provided. 4. Tilt the receiver to the desired viewing position. To install the receiver on the wall, use the mounting screw and anchor provided. 5. For daytime vision, place the camera up to ten feet from your baby making sure it is out of reach. 6. For nighttime vision, place the camera no more than six feet from your baby making sure it is out of reach. The camera has a built-in light sensor which will automatically turn on the night vision feature when there is no light detected. Remember, when using the infrared night vision, the image will only be in black and white. 7. Select the channel that gives you the best reception. Make sure both units are on the same channel. 8. If you have two cameras, you can monitor two different rooms. Set one camera to channel A and one to channel B. Change the channel on the receiver to determine which room you want to monitor. You can also set the receiver to automatically scan between the two cameras. Please refer to the Automatic Channel Scan section on page 7. 9. Use the up and down buttons on the right side of the receiver to adjust the brightness. To adjust the contrast and color, please refer to the Brightness, Contrast, and Color Adjustment section on page 7. 10.Turn the volume dial on the top right corner of the receiverto the desired level. 6 SPECIAL FEATURES Receiver LCD Power Option You can turn the screen of the receiver off and still maintain the sound monitor function. To use this function, slide the switch on the receiver to the LCD OFF position. The use of this feature will allow you to still hear your baby. Automatic Infrared Night Vision The infrared night vision function is designed to allow the camera to pick up images even when the room is dark. Using the built-in light sensor, the camera will automatically convert to night...