Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
• If all 7 indicators are ‘On’, the Everyday mode is selected. • If only the Monday through Friday indicators are ‘On’, the Weekdays only mode is selected. • If only the Saturday and Sunday indicators are ‘On’, the Weekends only mode is selected. To change the Alarm Mode setting for Alarm 1, hold the ALARM 1 setting button and press the ALARM MODE button until the Day indicators show the desired mode setting, Weekdays only, Weekends only, or Everyday operation. Release the ALARM MODE and ALARM 1 setting buttons and the display will return to the correct time. Follow the same procedure to select the desired Alarm Mode for Alarm 2 if necessary. Checking The Wake Up Times And Alarm Mode Whenever you want to check the wake up time or the alarm mode settings, simply press either the ALARM 1 or ALARM 2 setting buttons. The display will change from correct time to wake up time and the day indicators will show you the alarm mode which is currently selected. Release the ALARM 1 or ALARM 2 setting buttons to return to correct time. 12 CKS2862_061207.p65 12 12/6/2007, 15:54 Listening To The Radio 1.) Set the Band selector to the desired band, AM or FM. 2.) Set the VOLUME control to a low setting. 3.) Press the RADIO ON/OFF button to turn the radio ‘On’. 4.) Select your desired station with the TUNING control on the right side of the cabinet. 5.) Adjust the VOLUME control to the desired setting. 6.) When you are finished listening, press the RADIO ON/OFF button to turn the radio ‘Off’. The radio dial pointer light goes off. Antenna Information AM – The AM bar antenna is inside the cabinet. If AM reception is weak, change the position of cabinet until the internal antenna picks up the strongest signal. FM – The FM antenna is built in to the AC power cord. If FM reception is weak try varying the position and direction of the power cord until you find the strongest signal. 13 CKS2862_061207.p65 13 12/6/2007, 15:54 Wake To Radio 1.) Turn the radio ‘On’and select the band, station, and volume level that you wish to hear when the alarm comes on, then turn the radio ‘Off’again. 2.) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 3.) Set the ALM selector switch for one or both alarms to the “RADIO” position. The appropriate ALM 1 and/ or ALM 2 indicators will light up to confirm that the alarms are set. 4.) At the selected wake up time the radio will turn ‘On’. It will play for one hour and then shut off automatically. 5.) To stop the radio sooner, press either the appropriate ALARM 1 or ALARM 2 button, or press the RADIO ON/OFF button. The radio will stop but the alarm remains set and will turn the radio on again at the same time on the following day (depending on the Alarm Mode setting). 6.) If you do not want the alarm to turn the radio on the following day, set the appropriate ALM selector to the “OFF”position. 14 CKS2862_061207.p65 14 12/6/2007, 15:54 Wake To BUZZER (Crescendo Alarm) Note: Alarm 1 and Alarm 2 have different buzzer sounds. •Alarm 1 is a “Single beep” sound. •Alarm 2 is a “Double beep” sound. You will be able to tell which alarm is going off by the sound that it makes. 1.) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 2.) Set the ALM selector switch for one or both alarms to the BUZZER position. The appropriate ALM 1 and/or ALM 2 indicators will light up to confirm that the alarms are set. 3.) At the selected wake up time the buzzer will sound. It will begin softly and gradually increase in volume to wake you up. It will continue for one hour and then shut off automatically. 4.) To stop the buzzer sooner, press either the appropriate ALARM 1 or ALARM 2 button. The buzzer will stop but the alarm remains set and will turn the buzzer on again at the same time on the following day (depending on the Alarm Mode setting). 5.) To stop the buzzer and turn on the radio immediately, press the RADIO ON/OFF button instead of the ALARM 1 or ALARM 2 button. 6.) If you do not want the alarm to turn the buzzer on the following day, set the appropriate ALM selector to the “OFF” position. Radio And Buzzer Operation You may also set one alarm for “Wake To Radio” and the other for “Wake To Buzzer”. Just set the ALARM 1 and ALARM 2 selector switches to the desired positions. Snooze Alarm After the radio or buzzer alarm sounds in the morning you may press the SNOOZE Bar for a few more minutes sleep. The respective ALM indicator will flash. The alarm will stop for approximately 9 minutes and then turn on again. You may repeat the Snooze operation up to seven times if desired, but after the seventh time the alarm will not turn on again. 15 CKS2862_061207.p65 15 12/6/2007, 15:54 Sleep To Music Timer You can program the Sleep Timer to play the radio for up to 90 minutes and then shut off automatically. 1.) Press the SLEEP button. The display will briefly show “10”and the radio will begin to play. After...