8.Tuning Control 9. Clock Display 10. Battery Compartment 11. External Wire Antenna 12. Speaker 13. Stand Feet 5 7 9 14 2 4 12 1 13 3 8 6 11 10 01-4250N-GE,GB 7/21/06 12:08 PM Page 7 POWER SOURCES Insert 1 pc of 9V type (006P size) battery into the battery compartment (10) for clock back-up purpose. Before plugging in the AC power cord, please check the rating plate of your unit. It MUST MATCH with your household main supply. Then plug the AC power plug into the mains power supply. NOTE: Always remove the batteries from the battery compartment when the unit is not going to be used for a long period of time. You avoid battery leakage, which would damage the unit. To have the best performance, the using of alkaline battery is recommended. PLACEMENT This unit is specially designed to be installed under the kitchen cabinet, or placed at the desktop by using the stand foot. Please refer to the —INSTALLATION— section for under kitchen cabinet mounting. CLOCK SETTING 1. To set hour, while holding the Time Set button (4) down, press the Hour Set button (5) until the desired hour is displayed. Release both buttons. 2. To set the minute, while holding the Time Set button (4) down, press the Minute Set button (6) until the correct time appeared on the Clock Display (9). Release both buttons. RADIO OPERATION 1. To switch on the radio, slide the Function switch (7) to the "ON" position. 2. Then adjust your desired sound volume level by turning the Volume control (1). 3. Turn the Tuning Control (8) to select your favorite radio station. 4. To turn off the unit, slide the Function switch (7) to "OFF" position. NOTE: The External Wire Antenna (11) is effective for FM band. Un-wire the entire antenna & hang it to a higher position for the best reception. 8. Desktop 01-4250N-GE,GB 7/21/06 12:08 PM Page 8 WAKE TO RADIO OR BUZZER 1. Select the desired radio & volume level, please refer to —RADIO OPERATION— section for details. 2. Press & hold the Alarm Set/OFF button (3) & set the desired alarm hour & minute by pressing the Hour Set button (5) & Minute Set button (6) respectively [For 12 hours display format unit, a "PM" indicator at the top-left corner to indicate the afternoon time]. 3. Slide the Function switch (7) to "AUTO" position. Then, the radio will be on automatically to wake you up at the preset time. 4. To be waked by buzzer instead radio, turn the Alarm Buzzer Control (1) to "BUZZER" position. 5. To turn the radio or buzzer off (before or during the alarm activated): A. Slide the Function switch (7) to the "OFF" position to terminate the alarm B. Press the Alarm Set/OFF button (3) once to stop at alarm until the next day same preset time. COUNT-DOWN TIMER 1. Slide the Function switch (7) to "OFF" position for activating the count-down timer only or switch to "ON" position for activating the count-down timer & keep listening the radio at the same time. 2. switch the Count-Down Timer Control (2) to "ON" position, & the default setting of count-down duration "00:59" will appear on the clock display (9). 3. To set the count-down duration, press the Minute Set button (6) to decrease the minute setting by 1 minute per step. Press the Hour Set button (5) to set the setting by adding 1 hour more. [The count-down duration can be set from 1 minute to 1 hour 59 minutes] 4. The buzzer will be activated when the count-down time setting due. 5. To terminate the activated buzzer, slide the Count-Down Timer Control (2) to "OFF" position. 6. To terminate the count-down counter before the buzzer activated; slide the Count-Down Timer Control (2) to "OFF" position to turn off the timer function accordingly [Press any other clock keys during the count-down period will interfere the timer function & display]. INSTALLATION Under kitchen cabinet mounted: 1. Install the plastic mounting bracket onto the kitchen cabinet by screws as shown. [Turn both Stand Feet (14) as shown] 9. 01-4250N-GE,GB 7/21/06 12:08 PM Page 9 2. Then, install the unit by inserting into the bracket (until the hook clipped with the unit). You can also choose to install the unit into lower position if needed. 3. To release the unit from the bracket, just simply press & pull the Hook-Release handle as shown & pull the unit with reverse direction from the installation. ATTENTIONS: - Your unit must not be exposed to rain, direct sun-light or high temperature! - Your unit may only be repaired by a qualified specialist TECHNICAL DATA Power source : Mains connection: 230V ~ 50Hz Back-up battery: 9-Volt-Batterie fur die Uhrzeit Radio frequency bandwidth : FM 87.5 - 108 MHz VENTILATION WARNING!! The normal ventilation of the product shall not be impeded for intended use. DRIPPING WARNING!! The product shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the product. All subjected to change for improvement without any notice 10. Hook 5 mm 30 mm 01-4250N-GE,GB 7/21/06 12:08 PM Page 10 More Information Beware of smal...