Log:
Assessments - 3, GPA: 4.3 ( )

Instruções de Operação Elta, Modelo 4556

Fabricante : Elta
Arquivo Tamanho: 1.82 mb
Arquivo Nome : 1ea89218-5441-73d4-617b-49f19c57c77b.pdf
Língua de Ensino: plitentresfrdenlhuptcs
Ir para baixar



Facilidade de uso


(Diagram 1) 3. Press volume up control button »*] +(3) (position 3) and volume down control button [««I (4) (position 2) to set day. 4. Press alarm 1 set button (10) (position 1) hour blinking. Press volume up control button +(3) (position 3) and volume down control button U« (4) (position 2) to set hour. 5. Press alarm 1 set button (10) (position 1) minute blinking. Press volume up control button »>< + (3) (position 3) and volume down control button >< + (3) (position 3) and volume down control button >« (4) (position 2) to select alarm 1 (JJ bell and g| alarm radio. © 015. DIAGRAM 1 MON TUE WED ir 1 hn ®AL1 uu THU FRI SAT WEEKED ALARM 1 SET MODE (MON TO SUN) I SUN ar uu SAT WEEKED ALARM 1 SET MODE (MON TO FRI) WEEKED ALARM 1 SET MODE (SAT TO SUN) ALARM 2 SETTING 1. Press alarm 2 set button (9) (position 1) to enter into alarm 2 set mode. 2. Press and hold alarm 2 set button (9) 2 seconds, day blinking. ( Diagram 2) 3. Press volume up control button »< + (3) (position 3) and volume down control button >« (4) (position 2) to set hour. 5. Press alarm 2 set button (9) (position 1) minute blinking. Press volume up control button »«J +(3) (position 3) and volume down control button >« (4) (position 2) to select alarm 2 [j] bell and g| alarm radio. © 016. □ ALARM 1 WAKE BY BELL ALARM 2 WAKE BY RADIO Alarm output setting and alarm on/off Press alarm 1 / alarm 2 / alarm 1+2 select button (13) to select alarm wake up by bell and radio. (Diagram 3) ALARM DURATION Bell alarm or radio alarm will continue output for 1 hour if no key is pressed. Alarm will stop automatically and restart at the same alarm set time on next day. STOP THE ALARM Press power button (14) to stop the current alarm and will cancel the snooze function as well. © 017. DIAGRAM 4 ef 30 SLEEP SET MODE To activate the sleep function When radio on press snooze/sleep button (16), sleep “90” show on display with 2 second decrease sleep timer 90 minute-off by press snooze/sleep button (16) each. (Diagram 4) NOTE: Press power on/off button (14) to off sleep function. Snooze function: 1. Press snooze / sleep button (16) to activate snooze function (bell alarm or radio alarm will stop) when alarming. 2. Snooze interval is 9 minutes. WORKING WITH AUDIO SOURCE 1. Use connective wire to join the audio source and the main unit together. 2. Adjust volume of the audio source in order to get a better amplifying effect. REMARK: DO NOT set the audio source to too high volume to avoid overloading. The output sound of the main unit will be eliminated and replaced once the “AUDIO IN” JACK (15) has connected to other audio source. The sound will resume once the connective wire is removed from jack. If “audio in“ function is in use and broadcasting music, the alarm sound will insert into the music at the pre-set wake up time. To stop the sound, simply press the power on/off alarm off button (14). RADIO OPERATION - Press the power on/off button (14) to turn radio on. - Select AM or FM band using the wave band switch (2). - Select the station using the tuning control (8). - Press the volume control button (3)/(4) to adjust volume as required. - Press the power on/off button (14) to turn radio off. Note: - The AM band use an internal directional aerial. Rotate the radio for best reception. - Ensure that FM cord antenna (7) is completely unrolled and extended for FM reception. © 018. RESET - The reset button (17) is located on the bottom of unit. - Use a ballpoin pen to press it whenever you change batteries, or unit is not performing as expected. - This will return all settings to default value, and you will lose any stored data (alarm and clock settings). CAUTION - No naked flame sources, such as lighted candles, should be placed on the apparatus. - Do not place the unit in closed bookcases or racks without proper ventilation. - To prevent Fire or shock hazard, do not expose unit to rain or any type of moisture. - The unit should not be exposed to direct sunlight, very high or low temperatures, moisture, vibrations or -placed in a dusty environment. - Do not use abrasive, benzene, thinner or other solvents to clean the surfaces of the unit. To clean, wipe it with mild non-abrasive detergent solution and clean soft cloth. - Never attempt to insert wire, pins or other such object onto the vents or openings or the unit. SPECIFICATION Frequency range: AM 525 - 1615 kHz ATTENTION: FOR SAFETY USAGE Ple...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias