Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
If this happens, please try again, with a different iPhone or iPod if needed. If sync still fails, please see Setting Time Manually below to set the clock. NOTE: iPhone time is automatically updated to the correct time via cell phone towers. The time on your iPod is accurate only to the time on the computer the last time the iPod was synced to it. It’s possible to have up to 59 seconds difference between the unit and synced iPhone/iPod. Setting Time and Calendar Manually 1. Press and hold the Time Sync/Set Button located on the back of the unit until the current time flashes on the display. Press the or Button to adjust to the correct time (hold the button to advance or reverse rapidly). 2. Remember to set the correct AM or PM time. The PM Indicator is located to the left of the time display; there is no AM indicator. Press and release the or Button during time setting to toggle between standard 12 hour time display and 24 hour time display. The PM indicator is disabled when time display is set to 24 hours. 3. Press the Time Sync/Set Button. The year will be displayed and a beep will sound. Press the or Button until the current year is displayed. 4. Press the Time Sync/Set Button again. The month and date will appear (ex. 3:13 = March 13). Press the or Button until the current month/date is displayed. Holding the button for a few seconds will advance or reverse rapidly. 5. Press the Time Sync/Set Button again (or no button within 10 seconds) to exit the time/calendar setting mode. You will hear two beeps confirming Time and Calendar setting are completed. Using the Alarms Setting the Alarms 1. By default, the unit selects iPhone/iPod as your wake source. If no iPhone/iPod is docked or detected, the unit will automatically default to buzzer alarm. Note: The alarm sounds for 1 hour. Make sure you have an hour of audio on your iPhone/iPod. 2. Press and hold the Button until the display flashes. The unit will beep.Press the or Button to set the alarm time. Remember to set the correct AM or PM time. 3. Press the Button (or no button press within 10 seconds). Two beeps will confirm alarm one is set and exit alarm setting mode. The alarm is then armed, indicated by the alarm icon on the display. 4 4. To set Alarm 2 just follow steps 2 - 3 using the Button. Operating the Unit Operating the Unit Reviewing, Arming and Disarming Alarm (Turn Alarm Function On and Off) 1. Once an alarm is set, press the associated alarm button to view the currently set alarm time and to toggle the alarm on (icon) or off (no icon). 2. To arm/disarm the alarm, just press the associated alarm button to toggle it on or off. If the alarm is armed, the related alarm icon will appear on the right side of the display. Resetting the Alarm to Come on the Next Day 1. When the alarm is sounding, press the Button to stop the alarm and reset it to come on the following day. You can also press the alarm button for the sounding alarm (alarm 1 or alarm 2) to reset it. Snooze Operation 1. By default, snooze lasts for 9 minutes. To adjust the snooze time, press and hold the Snooze/Dimmer Button until the display flashes. Press the or Button to set the snooze timer from 1 to 29 minutes. 2. Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again after the set snooze time. Snooze can be pressed several times during the 1 hour alarm cycle. Sure Alarm The unit has a sure alarm feature. If backup batteries are installed, the buzzer alarm will still sound in the event of power failure. Charging your iPhone/iPod Gently dock your iPhone/iPod using the insert for your iPhone/iPod (see Qucik Start guide). Using an insert provides the best stability and protection, but you can safely dock your iPhone/iPod without an insert. 1. While your iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged). Back up batteries will NOT charge iPhone/iPod. Note that non-docking iPhone/iPod models will NOT charge. Listening to your iPhone/iPod 1. Dock your already playing iPhone/iPod. The unit will automatically turn on and after a few moments you will hear the audio playing from your iPhone/iPod, starting softly and gradually increasing to the set volume. Note: If the volume on the playing track is too low, the unit may not detect that your iPhone/iPod is in play mode. If this happens, press the Button on the main unit to play it. 2. When the iPhone/iPod is docked and in standby mode, press the Button on the unit to play it. The will appear on the display, indicating iPhone/iPod play mode. 3. Press the Button to pause play; press again to resume it. 4. Press the Volume and Volume Button to adjust the system volume. 5. Press the or Button on the unit to go to the next or previous track. Press and hold while a track is playing for high speed forward or reverse music search of the current track. 6. To turn off the unit, press the Button. The iPhone/iPod will continue charging while in the doc...
Este manual também é adequado para os modelos :Receptores de rádio - IP23 (122.77 kb)