Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
When the countdown timer reaches “00:00:oo”, the unit will beep. Press the TIMER button again to turn off the beeps. NOTES: • During the countdown, if you press the TIMER button again, the countdown timer will revert back to the original timer. • If no countdown time has been set as shown on the previous page, and the TIMER button is pressed and released, the unit will turn on and beep. • After the countdown timer has gone off, each subsequent press of the TIMER button will set the countdown timer for the time as previously set. To change the countdown timer time to a different time, simply repeat the instructions on the previous page (“TO SET THE COUNTDOWN TIMER”). • When the countdown timer is counting down, press the DISPLAY button to cycle from the clock to the timer. 11 7:09 AM Page 12 OPERATION (CONTINUED) TO LISTEN TO THE RADIO Press the POWER button . to turn the unit on. Press the RADIO/BAND button once . to select radio. Repeatedly press to select the desired band (AM, FM). 2 1 1 Tune a station by pressing the SKIP/TUNING or button .. To scan for strong station(s), press and hold the the SKIP/TUNING or button .; the unit will then scan and stop on the next strong station. Adjust the volume using the VOLUME +/– buttons . . 22 11 2 Antennas FM: Extend the AC cord for better FM reception. AM: Turn the unit for better AM reception. 12 Turn the unit on and press the RADIO/BAND button . to select radio and band. Press the SKIP/TUNING or button . to find the desired station. 221 1 SETTING RADIO PRESETS (UP TO 20 PRESETS) Press the MEM/CLOCK SET button . to confirm. Then select the Memory Preset (up to 20) using the Number buttons .. Simply press the Number buttons . to directly enter the Memory Preset. For Memory Presets over 9, press the OVER button ., followed by the Number buttons . (i.e. to select 12, press the OVER button, followed by “1” then “2”). 1 2 3 2 1 4 31 TO RECALL MEMORY PRESETS 1 4 31 TO RECALL MEMORY PRESETS 7:09 AM Page 13 OPERATION (CONTINUED) To recall the Memory Presets, simply press the MEMORY UP/REPEAT button . or MEMORY DOWN/ RANDOM button ., or directly select them using the Number buttons .. For Memory Presets over 9, press the OVER button . , followed by the Number buttons . (i.e. to select 12, press the OVER button, followed by “1” then “2”). 2 To temporarily mute the sound, press the MUTE button . on the remote, the sound will be muted. Press the MUTE button . again or one of the VOLUME +/– buttons . to restore the sound. Open the CD compartment door by pressing the OPEN/CLOSE button. Insert a disc, label side up, onto the spindle and close the CD compartment door. 1 Pressing the DISPLAY button will cycle the display as follows: 1st press: Clock 2nd press: Timer 3rd press: CD or Radio display 1 TO INSERT A CDDISPLAY 2 12 1 MUTE MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 14 OPERATION (CONTINUED) TO PLAY A CD 14 Insert a CD as described on the previous page. Press the POWER button . to turn the unit on and press the CD button .. The total playing time and number of tracks will appear in the display. 2 1 1 Press the PLAY/PAUSE ( ) button to start playback; the Play indicator will appear. TO PAUSE PLAYBACK, press the PLAY/PAUSE ( ) button again; the display will blink and the Pause indicator will appear. Press again to resume playback. 2 To skip forward or backward through the tracks on the disc, press the CD SKIP/TUNING or button. To search forward or backward through the tracks on the disc, press and hold the SKIP/TUNING or button. 3 Adjust the volume using the VOLUME +/– buttons . as desired. When the disc is through playing, it will stop. Press the STOP () button . to stop the disc before it is finished. 11 2 4 NOTES: • If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will show “no dISC” • To remove the CD, press the OPEN/CLOSE button and remove the CD. • Most buttons are both on the main unit and the remote control. FAQS: Do I need an adapter to play 3” singles? No, simply insert the 3” single into the groove. What is the maximum time for a CD in this unit? The maximum time is 74 minutes. MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 15 OPERATION (CONTINUED) DIRECT TRACK ACCESS 1 2 1 When a CD is playing, simply press the Number buttons . to directly select a track. For tracks over 9, press the OVER button ., followed by the Number buttons . (i.e. to select track 12, press the OVER button, followed by “1” then “2”. TO REPEATEDLY PLAY BACK ONE TRACK Press the POWER button . to turn the unit on and press the CD button .. Press the MEMORY UP/REPEAT button . twice; Repeat ONE will appear in the display. 3 21 1 Press the SKIP/TUNING or button . to select a track. Press the PLAY/PAUSE ( ) button . to start playback and the unit will play the same track over and over until the STOP ( ) button . is pressed. 1 3 1 22 TO REPEATEDLY PLAY BACK ALL TRACKS ON A CD Press the POWER button . to turn the unit on and press the CD button .. Press the MEMORY UP/REPEAT bu...