Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
2. Rotate the Rotary Set Dial (#8) counterclockwise for adjusting the current minute or clockwise for adjusting the current hour. 3. A “PM” Indicator (#19) is located on the LED Clock Display (#7) in the upper left-hand corner. The time will be in the “AM” range when the “PM” indicator is not lit. It is important that the "AM" or "PM" setting is correct for proper operation of the alarm function. 4. Once the time is adjusted, set the Clock Setting Switch (#5) to the “RUN” position. The 2 flashing dots will stop flashing. P5 SETTING THE ALARM TIME 1. Set the Clock Setting Switch (#5) to the “ALM” position. The 2 dots between the hour and minutes will begin flashing. 2. Rotate the Rotary Set Dial (#8) counterclockwise or clockwise for adjusting the hour or minute for the alarm respectively. 3. Once the alarm is adjusted to the desired wake-up time, set the Clock Setting Switch (#5) to “RUN” position. The 2 flashing dots will stop flashing. 4. Note: Do not rotate the dial too quickly when you are setting the clock or alarm to insure desired time and alarm settings. ALARM OPERATION Set the ON/AUTO/OFF Switch (#6) to the “AUTO” position. The AUTO Indicator (#20) will light. - WAKE TO RADIO Set the radio Tuning Control Knob (#10) to the station you wish to listen to when the alarm time is reached. Set the Volume/Buzz Knob (#12) to a desired volume level. The radio will now turn on at the selected alarm time. - WAKE TO BUZZER Slide the Volume/Buzz Knob (#12) to the BUZZ position. The buzzer will now turn on at the selected alarm time. TIME SETTING FOCUSING FOR PROJECTION CLOCK - To set the hours, simultaneously press and hold the Hour Button (#16) and the Time Button (#18). Keep them depressed until the desired hour digits are displayed. - To preset the minutes, simultaneously press and hold the Minute Button (#15) and the Time Button (#18). Keep them depressed until the desired minute digits are displayed. - Focusing: Adjust the projection clock clarity by turning the Focus Adjustment Knob (#17) until the projected time is clearly shown on the ceiling or wall. Note: 1. The LED Digital Clock and the Projection Clock must be set separately. 2. The projected time is visible on a ceiling or wall in a darkened room. The maximum projection distance is 3-9 feet. P6 SNOOZE FUNCTION 1. When your alarm (buzzer or radio) sounds, you can press the Snooze Button (#3) to extend the alarm time by 9 minutes. The buzzer or radio will then turn on again once the 9 minutes expires. 2. This can be repeated until the ON/AUTO/OFF Switch (#6) is moved to the "OFF" position. SLEEP TIMER OPERATION 1. This clock radio is equipped with a “sleep timer” function that will switch off the radio automatically after a selected period anywhere from 1 minute up to 1 hour and 59 minutes. 2. Press the Sleep Button (#9), and then rotate the Rotary Set Dial (#8) clockwise to extend the operation period between 1 minute and 59 minutes or rotate it counterclockwise to set the sleep time in the range of 1 hour 59 minute). 3. After the selected sleep time has elapsed, the radio will automatically turn off. 4. To turn the unit off before the sleep time expires, press the Snooze Button (#3). SLEEP AND WAKE TO RADIO 1. Set the desired alarm time as described in the section “SETTING THE ALARM TIME”. 2. Tune the radio to your desired channel. 3. Set your desired sound volume and sleep time as described in the above section. 4. Switch the ON/AUTO/OFF Switch (#6) to “AUTO” position. The AUTO Indicator (#20) will light. 5. The radio will switch off after the sleep time has elapsed and on after the alarm time reaches. CARE AND MAINTENANCE 1. Clean the unit with a soft, damp (never wet) cloth. Solvent or detergent should never be used. 2. Avoid operating your unit under direct sunlight or in hot, humid or dusty places to reduce the risk of fire or electric shock. 3. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors. 4. For better Clock Display clarity, avoid operating the unit under direct sunlight or in strong room illumination. 5. Unplug the unit from the electrical power outlet immediately in case of malfunction. P7 SERVICE Please refer to the instructions on this Manual for returning your unit for service. When returning the unit, please remove batteries to prevent damage to the unit in transit and/or from possible battery leakage. We are not responsible for batteries returned with the product or for the cost of replacement. Distributed by: Spectra Merchandising International, Inc. Chicago Industry Tech Park 4230 North Normandy Avenue Chicago, IL60634, U.S.A. Please have model number ready, for Customer Service, call 1-800-777-5331 Printed in China ** THIS PRODUCT IS NOT A TOY. 910-H003 P8 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the d...