Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
2. Press TUNER/BAND button repeatedly to select either AM or FM band. 3. Use one of following methods to tune for the desired station. The display shows the tuned frequency. • Memory Tuning: Press PRESET+/ PRESET- buttons. When one of the preset stations is selected, the LCD shows channel number “CH0” and frequency “FM---MHz/AM---KHz”. There are 20 stations presets for FM and 10 station presets for AM. • Manual Tuning: Press SCAN UP/DOWN buttons with quick, short presses to manually tune upward or downward to the desired radio station. • Automatic Tuning: Press SCAN UP/DOWN or MODE button with a long press to automatically tune upward or downward to the next station with strong reception. Press EQ/PROG twice or STOP button once to stop automatic tuning. NOTE: • For better FM reception, extend and adjust the telescopic FM antenna to optimize reception. • While listening to stereo FM broadcasting, if the signal is strong enough, “STEREO” indicator will appear on the LCD display. If reception is poor or noisy, you may press ST/MONO button to turn it to MONO broadcasting. When MONO is selected, reception will be better, and “MONO” appears on LCD display. • Press STOP button to turn off the radio. STORING STATION MEMORIES RETRIEVING STATION MEMORIES You can store up to 20 FM stations and 10 AM 1. Press TUNER/BAND button to select either stations in memory. Follow steps below to set AM or FM band. station memory presets: 2. Press PRESET+/PRESET– buttons to find the preset station stored in memory that you wish 1. Press TUNER/BAND button repeatedly to to hear. select either AM or FM band. 3. Stop at the preset station desired and the 2. Press SCAN UP/DOWN button to tune for the station will begin play automatically. desired station. 3. Select the desired memory with PRESET+/PRESET– buttons. Once the desired memory is selected, press EQ/PROG button to save the memory. 4. Repeat steps 1 to 3 to store other stations into memory. 1918 EGO 4000 PLUS OPERATION MANU AL EGO 4000 PLUS OPERATION MANU AL OPERATING INSTRUCTIONS: CLOCK/ALARM continued SETTING LOCAL TIME AND DATE 7. Press UP/DOWN buttons to select correct SELECTING HOUR MODE month. Once the power supply is connected initially or 8. Press SET button again to save month This player has the choice of 12 or 24 hour clock after an extended period of non-use, the LCD dis-setting. Display starts to flash the day. modes that can be changed when the player is play indicates “00:00 SATURDAY JAN/01/2000”. 9. Press UP/DOWN buttons to select correct day. turned on or off. Follow the steps below to select You can select from numerous cities around the 10. Press SET button again to save date setting. the hour mode: world to serve as your local time zone. Once Display starts to flash the hour. your local time is set, the player can automatical11. Press UP/DOWN buttons to select correct 1. Press SLEEP button for about three seconds, ly tell you the time in different cities around the hour. HOUR MODE appears on the display. world. Follow the steps below to set local time 12. Press SET button again to save hour setting. 2. Press UP/DOWN buttons to select 12 HOUR and date: Display starts to flash the minute. or 24 HOUR mode then press SET button to 13. Press UP/DOWN buttons to select correct save it. 1. Press WORLD/LOCAL button for three seconds minute. until a city name appears on the display. 14. Press SET button again to save minute ALARM 2. Press UP/DOWN buttons to select your local setting. The time and date are set. city name or time zone. Setting Alarm Time: 3. Press SET button for two seconds to save. VIEWING WORLD TIME Follow the steps below to set Alarm 1/Alarm 2 The city name changes to day of the week time: on the LCD display. To view world time, press WORLD/LOCAL button 4. Press SET button again and the city name repeatedly until the desired city name indicates, 1. Press ALARM 1/ALARM 2 button to select reappears. Display starts to flash year. then world time will be shown for about 4 sec-Alarm 1 or Alarm 2. 5. Press UP/DOWN buttons to select correct year. onds. The “WORLD” indicator will flash at the 2. Press SET button and the hour indicator flashes. 6. Press SET button again to save year setting. same time on the display. 3. Press UP/DOWN buttons to select desired Display starts to flash the month. hour number. 4. Press SET button again to save and the minute indicator flashes. 5. Press UP/DOWN buttons to select desired minute number. 6. Press SET button again to save minute time and the alarm time is set. 7. Press ALARM ON/OFF button until the correct alarm on/off sequence is found then press SET button to save or cancel. The “AL 1 or AL 2” icon will indicate accordingly on the display. NOTE: After the alarm is set, the LCD display shows the setting for about ten seconds before resuming to the local time clock. Activating/Deactivating Alarm Follow the steps below to activate/deactivate Alarm 1/Alarm 2: 1. Press ALARM ON/OFF button once to see “Alarm 1” and “Alarm ...
Este manual também é adequado para os modelos :Receptores de rádio - 4000 (325.51 kb)