If no signal is found during this period, the tower icon will not appear and the clock will search again at 12:00 am the next night. PROGRAM MODE To enter the Program Mode hold down the “SET” button for 1 second, until the time zone (“-5” default) flashes in the lower left. The Program Mode Guide is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the Projection alarm. Complete programming is usually done for the initial set-up, and will require you to skip step 1 of programming sections “D” through “H”. Press the “SNOOZE” button at any time to exit the Program Mode, or wait approximately 15 seconds for the Projection Alarm to automatically return to normal operation. A. PROGRAMMING SEQUENCE Default (Factory) Setting 1. Time Zone Setting -5 (eastern standard time) 2. Daylight Saving Time ON/OFF ON 3. Adjustable Snooze 10 Minutes 4. Hour Setting 12: AM 5. Minute Setting :00 6. Year Setting 01 (2001) 7. Month Setting 1 (January) 8. Date Setting 1 9. Day Setting MO (Monday) 10. 12/24-hour Mode 12-hour B. FUNCTION BUTTONS There are 8 function buttons; three on the front, four on the back and one on the top of the projection alarm. The function buttons are labeled: ALM1/HOUR, ALM2/MIN, light intensity icon, DISPL, light direction icon, SET, MODE/+, and SNOOZE (the top bar). C. TIME ZONE SETTING 1. Hold down the “SET” button for 1 second, the time zone (“-5” default) will flash in the Date LCD. 2. Press and release the “Mode/+” button to select the appropriate time zone. There are 13 time zones to choose from based relative to the international time standard of GMT (“Greenwich Mean Time”)(shown as “0h” on display). 3. From –5h to –8h, a US map with the highlighted time zone will also be displayed to the right of the time display. 4. Press and release the “SET” button to confirm the time zone setting, and to advance to DST (Daylight saving time) setting. Text Box: -4h Atlantic Time -5h Eastern Time (default setting) -6h Central Time -7h Mountain Time -8h Pacific Time -9h Alaskan Time -10h Hawaiian Time -11h, -12h Next two time zones West of HAW 0h Greenwich Mean Time -1h, -2h, -3h Three time zones West of GMT D. DST (DAYLIGHT SAVING TIME) SETTING Note: The DST default is “On”, meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST “OFF”. 1. Hold down the “SET” button for 1 second (the selected time zone will flash); press the “SET” button once more until “On” flashes in the lower left and “DST” flashes in the upper right. 2. Press and release the “Mode/+” button to turn the DST off, as will be indicated by the display of “OFF” in the time LCD. Note: Only turn the DST setting off if you live in an area that does not change time for Daylight Saving Time. 3. Press and release the “SET” button to confirm the DST setting, and to advance to select the length of the snooze. E. ADJUSTABLE SNOOZE TIME Note: The snooze length can be adjusted from 1 minute to 59 minutes. This duration refers to the length of time the alarm will be disabled when the “SNOOZE” bar is pressed. If set to “0”, activating the snooze will turn off the alarm for 24 hours. 1. Hold down the “SET” button for 1 second (the selected time zone will flash), press the “SET” button 2 more times, until “Sno” appears in the lower left and duration (“:10” default) flashes in the time LCD. 2. Press and release the “Mode/+” button to advance the snooze time from 0 (off) to 59 minutes. 3. Press and release the “SET” button to confirm the snooze setting, and to advance to manually set the time. F. TIME SETTING Note: When the WWVB signal is found, that time will over-ride the manually set time. 1. Hold down the “SET” button for 1 second (the selected time zone will flash), press the “SET” button 3 more times, until the hour flashes in the time LCD. 2. Press and release the “Mode/+” button to select the hour. Note: when setting the hour, “PM” will appear to the left of the hour display, if it is AM nothing will be displayed. 3. Press and release the “SET” button to confirm the hour setting, and to advance to select the minutes. 4. Press and release the “+” button to select the minutes. 5. Press and release the “SET” button to confirm the time setting, and to advance to manually set the date. G. DATE SETTING Note: When the WWVB signal is found, that date will over-ride the manually set date. 1. Hold down the “SET” button for 1 second (the selected time zone will flash), press the “SET” button 5 more times, until the year flashes in the date LCD. 2. Press and release the “Mode/+” button to select the year. 3. Press and release the “SET” button to confirm the year, and to advance to set the month. 4. The month will flash. Press and release the “+” button to select the appropriate month. 5. Press and release the “SET” button to confirm the month, a...