Assessments - 3, GPA: 5
(
)
)
|
Facilidade de uso
. All current settings of the radio are saved. . CD already inserted in the unit remains there. Attaching the control panel There are various ways of attaching the control panel but the following method is recommended: . Hold the control panel perpendicular to the unit. . Slide the control panel into the unit’s guides, located at the lower left and right sides, until it clicks into place. . Push the control panel gently in upward direction until it clicks into its place. 1 2 Note: . When attaching the control panel, make sure you do not press on the display. If the unit was still switched on when you removed the control panel, the unit will automatically switch back on with the last settings activated i.e. radio, CD or CD changer (AUX) when the panel is reinserted. ENGLISH REMOVABLE CONTROL PANEL SWITCHING ON/OFF Off timer After opening the control panel, the unit will switch off after a pre-adjusted time between 0 to 30 seconds. . Press the MENU button 8. . Press the fi button 7 twice to display “OFF TIMER”. . Set the time using the @ or # buttons 7. When you have finished making your changes, . press the MENU button 8 twice. Note: . If the OFF TIMER is set to 0 second, the unit switches off immediately after opening the control panel. Switching on/off There are various ways of switching the unit on/off: Switching on/off using the vehicle ignition If the unit is correctly connected to the vehicle’s ignition and it was not switched off using ON/OFF button 2, it will switch on/off simultaneously with the ignition. Switching on/off using the removable control panel . Remove the control panel. The unit switches off. . Attach the control panel again. The unit switches on. The last settings (radio, CD, CD changer or AUX) will be reactivated. Switching on/off using button 2 . To switch the unit on, press button 2. . To switch the unit off, press button 2 for longer than two seconds. The unit switches off. Note: . If you switch on the unit when the ignition is off, the unit will switch off automatically after one hour to prevent draining of the vehicle battery. SWITCHING ON/OFF ADJUSTING THE VOLUME Switching on by inserting a CD If the unit is switched off and there is no CD inserted in the drive, . press the button 1. The release panel opens. . Gently insert the CD with the printed side uppermost into the drive until you feel some resistance. The CD will be drawn automatically into the drive. You must not hinder or assist the drive as it draws in the CD. . Gently close the control panel whilst exerting a little pressure until you feel it clicks into place. The unit switches on. CD playback begins. Adjusting the volume The volume can be adjusted in steps from 0 (mute) to 66 (maximum). . To increase the volume, turn the volume control 3 to the right. . To decrease the volume, turn the volume control 3 to the left. Setting the power-on volume You can set the unit’s default power-on volume. . Press the MENU button 8. . Keep pressing the fi or % button 7 until “ON VOLUME” appears in the display. . Set the power-on volume using the @ and # buttons 7. To help you adjusting the volume more easily, the audible volume level will increase or decrease accordingly as you make your changes. If you select “LAST VOL”, the volume played before the unit was last switched off will be reactivated. Note: . To protect your hearing, the maximum switch-on volume under the “LAST VOL” setting is “38”. If the volume was higher before the unit was switched off and “LAST VOL” has been selected, the volume will be set at “38” the next time the radio is switched on. When you have finished making your changes, . press the MENU button 8 twice. ENGLISH ADJUSTING THE VOLUME Instantaneous volume reduction (mute) This feature allows you to instantaneously reduce (mute) the volume to a level preset by you. . Briefly press button 2. “MUTE” appears in the display. Setting the mute level You can set the unit’s mute volume level. . Press the MENU button 8. . Keep pressing the fi or % button 7 until “MUTE LVL” appears in the display. . Set the mute level using the @ and # buttons 7. When you have finished making your changes, . press the MENU button 8 twice. Mute while telephoning If your unit is connected to a mobile telephone, the car radio’s volume will be muted as soon as you “pick up” the telephone. “PHONE” shows in the display. This requires the mobile telephone be connected to the car radio as described in the installation instructions. The volume will be reduced to the configured mute volume level. Confirmation beep For some functions you will hear a confirmation beep if you keep a button pressed for longer than two seconds. For instance, after storing a radio station to a station button you will hear a confirmation beep. The beep can be switched on/off. . Press the MENU button 8. . Keep pressing the % or fi button 7 until “BEEP” appears in the display. . Use the @ and # buttons 7 to switch between the options. “OFF” means beep off, “ON” means the...
Este manual também é adequado para os modelos :Receptores de rádio - Atlanta CD34, Venice Beach CD34 (1021.68 kb)