Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
2 Hold down RADIO BAND•AUTO PRESET for 2 seconds until “AUTO” appears in the display. 3 Press DSPL•ENT MEM. The stations are stored in memory from the lower frequencies to the higher ones. If a station cannot be preset automatically You need to preset a station with a weak signal manually. 1 Press RADIO BAND•AUTO PRESET to select the band. 2 Tune in a station you want. 3 Hold down DSPL•ENT MEM for 2 seconds. 4 Select the preset number you want to preset the new station on by turning the jog dial. 5 Press DSPL•ENT MEM. The new station replaces the old one. On the remote (CFD-E75/E75L/E77L only) 1 Press BAND until the band you want appears in the display. 2 Press TUNE + or – until you tune in the station you want. 3 Hold down the number button that you want to preset the new station on for 2 seconds. To select the preset number over 10, press >10 first, then the corresponding number buttons. You need to hold down the last number button to enter for about 2 seconds. (Example: To select 12, press >10 and 1 first, then hold down 2 for about 2 seconds.) 16GB Playing preset radio stations Once you've preset the stations, use the jog dial on the player or the number buttons on the remote to tune in to your favourite stations. RADIO BAND AUTO PRESET Jog dial The Radio 1 Press RADIO BAND•AUTO PRESET to select the band. 2 Turn the jog dial to tune in the stored station. On the remote (CFD-E75/E75L/E77L only) 1 Press BAND until the band you want appears in the display. 2 Press the number button to tune in a stored station. To tune in a preset station over 10, press >10 first, then the corresponding number buttons. (Example: To tune in a preset station 12, press >10 and 1 first , and then press 2.) 17GB The Audio Emphasis The Audio Emphasis Selecting the audio emphasis (MEGA BASS) You can adjust the audio emphasis of the sound you are listening to. MEGA BASS Reinforcing the bass sound Press MEGA BASS. “MEGA BASS” appears in the display. To return to normal sound, press the button again. 18GB The Timer The Timer 3 Press DSPL•ENT MEM. Setting the clock The clock starts from 00 seconds. “– –:– –” indication appears in the display until you set the clock. Tip The time display system: MENU DSPL CFD-E75: 12-hour system ALARM Jog dial ENT MEM CFD-E70L/E75L/E77L: 24-hour system The Timer Before you set the clock, connect the power source (see page 24). 1 Press MENU•ALARM until “CLOCK” appears in the display, then press DSPL•ENT MEM. The hour digit flashes. 2 Turn the jog dial to set the current hour. Then press DSPL•ENT MEM. The minute digits flash. Set the minutes by turning the jog dial until the correct minute is displayed. 19GB Waking up to music You can wake up to music or a radio programme at a preset time. Make sure you have set the clock (“Setting the clock” on page 19). MENU ALARM DSPL ENT MEMJog dialSTANDBY Before you begin, make sure the (clock) indication is not lit in the display. If it is lit, press STANDBY. 1 Prepare the music source you want to play. To play the radio a CD Do this Tune in a station. Insert a CD. 2 3 Press MENU•ALARM until “TIMER” appears in the display, then press DSPL•ENT MEM. The (clock) and the music source (“Cd” or “RAdIO”) flash. Select the music source (“Cd” or “RAdIO”) by turning the jog dial, then press DSPL•ENT MEM. 4 Set the timer to the hour you want the music to start by turning the jog dial, then press DSPL•ENT MEM. Set the minutes, then press DSPL•ENT MEM. 5 Set the timer to the hour and the minutes you want the music to go off. (Do as step 4.) 6 Turn the jog dial to set the volume, then press DSPL•ENT MEM. 7 Press STANDBY. The indication lights up and the power goes off. At the preset time, the power will go on, and the music will play. Then the power will go off at the preset time, and the player will enter into the standby mode. To check/change when the playback will start Press MENU•ALARM until “TIMER” appears in the display, then DSPL•ENT MEM. Each time you press DSPL•ENT MEM, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and re-enter it. 20GB To use the player before a timer playback starts Just turn on the player, and then you can use it. If you turn off the player before the preset time, timer playback will start at the preset time. In case of the radio, however, if you listen to the station which is different from the one you tuned in step 1 on page 20, you will hear that station at the preset time. Make sure to tune in the station you want to listen to before you turn off the player. To stop play Press OPERATE (or POWER) to turn off the power. Notes • When you press STANDBY in step 7, make sure that n or z button of the tape player is not pressed. • When you press n or z button of the tape player in the timer mode: If the tape length of one side is longer than the set time, the player will be turned off at the end of the tape, not at the set time. Tips • To exit the standby mode, press STANDBY to make disappe...
Este manual também é adequado para os modelos :Receptores de rádio - CFD-E70L (824.55 kb)
Receptores de rádio - CFD-E77L (824.55 kb)