Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
After 59 minutes the radio w/ll be switched off automatically. • Select the waveband using the BAND switch • Locate the required transmitter using the TUNING dial ©. • Set the volume using the VOLUME switch © RADIO OFF You can switch off the radio before the slumber time (59 minutes) has elapsed: • Press the SLUMBER OFF/REPEAT ALARM button ©. Aerials - For FM reception there is an aerial wire at the rear of the clock radio This wire must be extended and, if necessary adjusted slightly, in order to obtain good reception. - The AM aerial is built into the clock radio. To obtain optimum reception you may have to adjust the position of the clock radio slightly CLOCK Clock display The clock indicates the time on the display. In case of 12-hour clock system, the PM indicator will light up (on=PM, off=AM). The ALARM indicator comes on when you switch on the alarm. Adjusting the time • Set the TIME SET switch © to TIME • Set the correct time using the HOUR 13 > and MINUTE© outtons. • Set the TIME SET switch © to RUN O CO u _/ _/ 4 Alarm Slumbering SETTING THE ALARM SLUMBER Alarmtime • Set the TIME SET switch © to ALARM. • Set the correct alarm time using the HOUR © and MINUTE (?) buttons. • Set the TIME SET switch ©to RUN. ALARM OIM The clock radio can awaken you in two ways: Wake by radio • Make sure the volume of the radio is loud enough to wake you. • Set ALARM switch © to RADIO. • You will be awakened at the set alarm time by the radio. Wake by buzzer • Set ALARM switch © to BUZZER. • At the set alarm time you will be awakened by the buzzer. ALARM OFF The clock radio has a built-in slumber function. This function enables you to listen to the radio before you fall asleep. You will not have to switch off the clock radio yourself. This will take place automatically. SLUMBER ON The time you listen to the radio before you fall asleep is called the slumber time. The slumber time is 59 minutes. If you wish to slumber, carry out the following: • Make sure the TIME SET switch © is set to RUN. • Press the RADIO ON/SLUMBER button © only. The display will show that you have a slumbertime of 59 minutes. SLUMBER OFF You can switch off the alarm in two ways: Switching off the alarm for nine minutes * Press the SLUMBER OFF/REPEAT ALARM button (f). With this switch you temporarily switch off the alarm. After nine minutes the alarm (radio or buzzer) will sound again. If you press the SLUMBER OFF/REPEAT ALARM button © again, the same will happen. If the SLUMBER OFF/REPEAT ALARM button © is not pressed again, the alarm will switch itself off after 1 hour and 59 minutes. The following day the alarm signal will sound again at the set alarm time. Switching off the alarm completely • Set the ALARM switch © to OFF. On the display the ALARM indicator will disappear and the alarm will be switched off. If you wish to be awakened the following day again, you must reset the ALARM switch to RADIO or BUZZER before going to sleep. You can switch off the radio before the slumber time has elapsed: • Press the SLUMBER OFF/REPEAT ALARM button © and the clock radio is switched off. - If the TIME SET switch © is in position TIME or ALARM, the slumber function will not work. - The slumber function does not affect the alarm. 5 English English Additional POWER FAILURE - When a power failure occurs, the complete clock radio will be switched off. - As soon as the power supply returns, the ^ numbers on the display will start to flash. This indicates that you must set the correct time on the clock. - You can insert a 9 Volt pack battery (type 6F22) in the clock radio. Should there be a power failure, the clock will continue to function. You will not see this, however, because the battery does not illuminate the clock display. As soon as the power is switched on again, the display will indicate the correct time. For clarity: Alarm, radio and display do not work on battery. • Before inserting the battery, connect the power plug to the wall outlet. • Place the battery in the compartment on the bottom of the clock radio. - Replace the battery once a year. It is not possible to say precisely how long the battery will last. The service life depends on how often and for how long the power supply fails. This varies according to country and region. IMPORTANT NOTES FOR USERS IN THE U.K. Mains plug This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug proceed as follows: • Remove fuse cover and fuse. • Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. • Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If th...
Este manual também é adequado para os modelos :Receptores de rádio - AJ 3040 (249.96 kb)
Relógios - AJ3040/00 (249.92 kb)
Relógios - AJ3040/00P (249.93 kb)