Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Power supply Caution •• The batteries contain chemical substances, so they should be disposed of properly. To operate the portable radio, you can use either alkaline batteries or built-in Ni-MH battery pack. b Operate on alkaline batteries 1 Open the battery compartment. 2 Insert 3 x 1.5 V AAA batteries (not supplied) with correct polarity (+/-) as indicated. (Fig. ) 3 Close the battery compartment. 4 Slide the power source selector to BATT. (Fig. ) »»The portable radio is operated on the alkaline batteries. c d Tip • To make sure that the built-in batter y has enough power to suppor t the alarm and flashlight function in emergency case, you are recommended to use alkaline batteries in normal times. Operate on Ni-MH battery To operate on the rechargeable Ni-MH batter y pack, slide the power source selector to RECHARGE BATT. (Fig. ) e Turn off After use, slide the power source selector to OFF. 3 Use your portable radio Listen to radio 1 Slide the power source selector to BATT (Fig. ) or RECHARGE BATT. (Fig. ) 2 Adjust the FM•MW•LW slider to select FM, MW or LW tuner. 3 Rotate the tuning knob to tune to a radio station. 4 Rotate the volume knob to adjust volume. (Fig. ) fFM/MW/LW To achieve better radio reception: • Position the antenna as far as possible from TV, VCR, or other radiation sources to prevent interference; • Put the radio near window or in a spacious place. • Change the length and direction of the antenna. Tip • To avoid radio interference, do not listen to the radio while charging your phone or built-in batter y. 5 EN EN 6 Charge mobile phone This portable radio can also serve as an emergency charger for your mobile phone. In places where AC outlet is unavailable, your phone will never run out of power with this device. 1 Open the MICRO USB cover and take out the supplied USB cable. 2 Plug the USB cable into a USB socket on your phone. (Fig. ) 3 Slide the power source selector to CHARGE MOBILE. (Fig. ) 4 Pull out the POWER GENERATOR, then rotate it quickly to charge your phone. (Fig. ) g h »»The charing indication appears on your phone. Note •• If the supplied USB cable does not match the USB socket on your phone, plug it into a USB convertor (not supplied) first, and then connect to your phone. •• For some mobile phones that have special requirements on the charging current or voltage, charging may be unsuccessful. Charge the Ni-MH battery pack You have two ways to charge the built-in Ni- MH battery pack. Charge through USB socket 1 Slide the power source selector to OFF, BATT, or RECHARGE BATT. 2 Connect a USB cable (not supplied) to : • the USB socket of your computer. • the USB socket of the portable radio. (Fig. ) »»The portable radio begins charging the Ni-MH battery. i 7 EN Tip •• It takes 8 hours to fully charge the battery. •• Fully charge the built-in battery if the radio has not been used for more than 3 months. Charge through power generator In emergency situation, you can charge the built-in battery through the power generator. 1 Switch the power source selector to OFF, BATT, or RECHARGE BATT. 2 Pull out the POWER GENERATOR, then rotate it quickly to generate power. (Fig. ) »»The generated power is stored in the Ni-MH battery. j Turn the flashlight on (Fig. ) Turn the alarm on (Fig. ) Tip •• To avoid children being frightened by the sudden strident ringing, keep children away from the radio. k l 4 Product information Note • Product information is subject to change without prior notice. Tuner Tuning Range FM: 87.0 - 108 MHz MW: 522 - 1620 kHz LW: 153 - 279 KHz General information Power Supply - Rechargeable Batter yNi-MH batter y pack -Alkaline Batter y 3 X AAA batteries Dimensions - Main Unit (W x H x D) 120 x 76 x 47 mm Weight -With Packing0.32 kg - Main Unit 0.26 kg 5 Troubleshooting Warning • Never remove the casing of this device. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this device, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips Web page (t). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. No power • Make sure that you have selected the correct power source. • Make sure that the alkaline batteries are installed properly. • Charge the built-in batter y. Poor radio reception • Keep the radio away from other electronic devices to avoid radio interference • Change the length and direction of the antenna. No sound • Adjust the volume. Cannot charge the phone or Ni-MH battery • Rotate the power generator as fast as you can. • Check if you have selected the correct power source. • The USB cable does not match the USB socket of your phone. Tr y a USB conver tor to connect your phone. • Due to different pr...