Assessments - 4, GPA: 3.8
(
)
)
|
por este dispositivo também tem outras instruções :
Receptores de rádio - XDR-S56DBP (1.34 mb)
Receptores de rádio - XDR-S56DBP (1.36 mb)
Receptores de rádio - XDR-S56DBP (772.09 kb)
Facilidade de uso
Knowing when to replace the batteries As the batteries become weak, the sound will become weak and distorted. When the batteries are completely exhausted, “.” appears in the display and the power is turned off. When “.” appears, replace all batteries with new ones. After the batteries are replaced, press POWER to turn the indication off. Notes on replacing the batteries . Do not take more than about 1 minute to replace the batteries, otherwise the clock, any lists of receivable broadcasts for DAB scan, preset favourite services and all settings will be initialized. Should that happen, these functions will need to be set again. . If the batteries are replaced while the power is on, the unit may revert to the factory setting. Notes on batteries . Do not attempt to recharge dry batteries. . Do not carry batteries with coins or other metallic objects. It can generate heat if the positive and negative terminals of the batteries are accidentally shorted by a metallic object. . If you are not going to use the unit for a long time, remove the batteries to avoid damage from battery leakage and corrosion. . Do not use different types of batteries at the same time. . When you replace the batteries, replace all with new ones. If the battery compartment lid comes off (See fig. .) The battery compartment lid is designed to come off when opened with excessive force. To reattach it, do the following. (Refer also to the illustration.) . Insert the right hinge of the lid into the right hole of the unit. . Insert the left hinge into the left hole of the unit. Using house current (See fig. .) Connect the AC power adaptor (supplied) to the DC IN 6 V jack firmly, and plug it into a wall outlet. Notes on the AC power adaptor . When operating the unit with the internal batteries, remove the AC power adaptor from the wall outlet and the DC IN 6 V jack. Make sure that the plug of the external power source is disconnected before operating the unit. . Use the supplied Sony AC power adaptor only. The polarity of the plugs of other manufacturers may be different. Failure to use the supplied AC power adaptor may cause the unit to malfunction. Improving the reception (See fig. .) DAB Band-III/FM: Extend the telescopic aerial and adjust the length and the angle for best reception. Note Adjust the direction of the aerial by holding it at the bottom. The aerial can be damaged if you move the aerial with excessive force. Initial setting for the DAB When the batteries are installed, or when the AC power adaptor is plugged in for the first time after purchase (or after resetting), pressing the POWER button on the unit will scan and create a list of receivable broadcasts If you wish to scan for DAB broadcasts again, or when the unit is reset, do the following: 1 Adjust the aerial accordingly. 2 Press POWER to turn on the radio. 3 Hold down AUTO TUNE for more than 2 seconds. “.... .......... ...” appears in the display. 4 Press PRESET/ENTER. No sound will be heard, and “..........” appears in the display. DAB scan takes about 30 ~ 90 seconds. When finished, the unit receives the first service in alphabetical order stored by the DAB scan. Notes . If you do not operate within 65 seconds, the initial scan mode will be cancelled. . If no broadcasts are found by the DAB scan, “...... ... .....” will be displayed. . To cancel the DAB scan halfway, press AUTO TUNE. Any services received before cancellation are added to the list of receivable services. . If the batteries are removed for a certain period, the received history list will be deleted, requiring you to scan again. . Initialization will erase any DAB services registered as PRESET. . If you change the unit’s location of use, or want to add a new service after initial setting, press and release AUTO TUNE. “.... ..........” appears in the display and the unit will automatically scan and create a list of receivable services. . DAB or DAB+ may not be receivable, depending on the country/region in which this unit is used. DAB/FM Digital Radio Operating Instructions Setting the clock For the first time after purchase, or after resetting, “AM 12:00” (or “0:00”) will blink in the display when batteries are installed or the AC power adaptor is plugged in, and then POWER is pressed. 1 Hold down CLOCK for more than 2 seconds to show the time set display. 2 Turn . (up)/. (down) to select “...” and press PRESET/ENTER. The hour indication starts blinking. Example: 12-hour system. 3 Turn . (up)/. (down) to set the hour, and then press PRESET/ ENTER. The minute indication starts blinking. 4 Turn . (up)/. (down) to set the minute, then press PRESET/ ENTER. The clock starts operating, and “.” starts blinking. Tips . To set the current time rapidly, hold . (up)/. (down). . To set the current time exactly to the second, adjust the minute function in step 4 and then press PRESET/ENTER together with a time signal (such as the telephone time signal). . The clock system varies depending on the model purchased. For exam...