Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
saving time (summertime) must cancel Automatic battery periodically. 2 Press one of the PRESET TUNING following simple checks to determine whether or not To use the unit as a battery buttons where the desired station is stored. DST/Summer Time adjustment before using the set. servicing is required. If the problem persists, consult your nearest Sonycharger 3 Adjust volume using VOLUME. dealer. Setting the sleep Setting the clock You can use the unit as a battery charger. iPod mini timer The clock displays “AM 12:00” due to a The charging begins when the iPod is placed on the and date iPod iPod power interruption. connector. Setting the alarm You can fall asleep to the sound using the built-in •The battery is low. Replace the battery. Remove the (color display) To change the setting manually, follow the procedure 4th generation 4th generation The charging status appears in the iPod display. For from step 1. details, see the user's guide of your iPod. sleep timer that turns off the unit automatically after a old battery and install a new one. The dual alarm function allows you to set two alarm preset duration. programs (ALARM A and ALARM B). 1 Press CLOCK for more than 2 seconds. When daylight saving time begins, the clock Notes On copyrights The alarm time can be set for each program and the 1 Press SLEEP while the unit is turned on. does not employ the daylight saving time The year will start to flash in the display. • The connector of the unit is for sole use for iPod. •iPod is a trademark of Apple Inc., registered in the alarm sound is selectable from RADIO, BUZZER or automatically. SLEEP appears in the display. 2 Press TIME SET + or – until the correct When you use the devices do not match with the U.S. and other countries. iPod. • Make sure the clock is set correctly. 2 Press SLEEP to set the sleep timer year appears in the display. connector, connect it to the AUDIO IN terminal of • iPhone is a trademark of Apple Inc. •Press and hold CLOCK and ALARM DISPLAY this unit with the supplied audio connecting cable. duration. Notes 3 Press CLOCK. simultaneously for at least two seconds to employ • All other trademarks and registered trademarks are • Sony cannot accept responsibility in the event that • Before setting the alarm, make sure to set the clock Each time you press SLEEP, the duration 4 Repeat steps 2 and 3 to set the month, day the DST function. of their respective holders. In this manual, ™ and ® data recorded to iPod is lost or damaged when using (see “Setting the clock and date”). changes as follows: marks are not specified. and time. an iPod connected to this unit. The alarm does not sound at the preset alarm •The factory setting alarm time is “AM 12:00”. After setting the minute the clock starts from 90 603015 time. •To set the radio alarm, first tune in to a station 0 seconds. But if you do not set “Minute”, the • Has the desired alarm been activated? (i.e., Does the (see “Operating the radio”). OFF 1 Put the iPod into the unit’s connector. clock does not start from 0 second flat. ALARM A (or B) indicator light up?) The display returns to clock mode five seconds Operating the radio • Pressing and holding + or – changes the year, The radio or iPod alarm is activated but no —Manual tuning To set the alarm time after you have finished setting the duration setting month, day or time rapidly. sound comes on at the preset alarm time. and released SLEEP, and then the sleep timer • While setting the clock, you must perform each step 1 Press RADIO ON to turn on the radio. To set ALARM A • Has VOLUME been adjusted? starts. within about 65 seconds, or the clock setting mode The display shows the band and frequency. 1 Press ALARM SET A for a few seconds. The unit will play for the duration you set, and There is no sound from the iPod. will be cancelled. 2 Press TIME SET +/– to set the desired then shut off. • Make sure the iPod is securely connected. hour, and press ALARM SET A. • Adjust the VOLUME. To display the year and date To turn off the unit before the 3 Press TIME SET +/– to set the desired The iPod cannot be operated with this unit. Press CLOCK once for the date, and within minute, and press ALARM SET A. preset time • Make sure the iPod is securely connected. about 5 seconds press it again for the year. 4 Press TIME SET +/– to set the desired Press OFF. The iPod cannot be charged. 2 Press RADIO ON repeatedly to select the The display shows the date or year for about alarm mode (RADIO, BUZZER or iPod) • Make sure the iPod is securely connected. desired band. 5 seconds and then changes back to the current time. and press ALARM SET A. Each press changes the band as follows: To use both sleep timer and 5 If you select the RADIO or iPod, press FM1 FM2 AM TIME SET +/– to set the wake up alarm Specifications Setting the brightness volume and press ALARM SET A. You can fall asleep to the radio and also be awakened FM1 and FM2 are the same frequency bands. by the radio or buzzer alarm at the preset time. Ti...