Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
1. Wake up to RADIO . Set the function selector to the [BUZZER] position. . Turn the [VOLUME] wheel left; make sure the volume is set at the desired level. 2. Wake up to BUZZER . Set the function selector to the [BUZZER] position. . Turn the [VOLUME] wheel right until you hear a click (volume off position). 3. Wake up to iPod . Set the function selector to the [AUX] position. . Turn the [VOLUME] wheel left; make sure the volume is set at the desired level. . Set the alarm setting of your iPod (not supported on all models) to the desired time you would like to wake up. Wake up function 1. Set the function selector to the [BUZZER] position. 2. Press the [ALARM] button together with the [HOUR] button until the display shows the desired hour. NOTE: When the PM indicator is off, the time is AM. 3. Press the [ALARM] button together with the [MIN] button until the display shows the desired minute. 4. On the display, the alarm on indicator will light (Figure 1). 5. To check the alarm time, press the [ALARM] button. Setting the alarm time 1. Press the [TIME] button together with the [HOUR] button until the display shows the desired hour. 2. Press the [TIME] button together with the [MIN] button until the display shows the desired minute. NOTE: When the PM indicator is off, the time is AM. Setting the clock MP3 cradle BAND (FM/AM) selector FUNCTION selector (RADIO, AUX, BUZZER) SNOOZE button VOLUME wheel TUNING wheel SLEEP button TIME button MIN (minute) button HOUR button ALARM button AUX-IN plug Location of controls Before you begin Powering up Plug the AC power cord into a 120V, 60Hz electrical outlet. The clock display will light up and flash indicating the power is on. NOTE: This cord is polarized. This means the cord will only fit one way into the socket or wall outlet. If it does not fit, do not force it, just reverse it and try again. Installing the back-up battery 1. Remove the battery compartment door (located at the bottom of the radio). 2. Insert a 9-volt battery (not included). 3. Replace the compartment door. Figure 1. [ALM] Alarm ON indicator ALM PM Important safety instructions CAUTION: When using this product, there are basic safety instructions that should always be followed. Refer to the the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Some of the below precautions may not apply to your product, e.g.: Battery and power cord precautions. When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water (for example, near a bath tub, kitchen sink or swimming pool). 5. Do not place this product on an unstable surface. 6. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where proper ventilation is not provided. 7. Never push objects of any kind into the ventilation slots of this product as they may touch dangerous voltage points or create a short circuit that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 8. Use only the power cord and batteries indicated in this manual. 9. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. 10. Plug the adaptor to the socket - outlet that is closest to the equipment and which is easily accessible. 11. Do not allow anything to rest on the power cord. Do not install this product where the cord may have anyone walking on it. 12. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 13. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 14. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under-the-table/cabinet outlet. 15. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions: A. When the power supply cord or plug is damage...