Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
2. Alarm 1 switch. 3. Alarm 1 button. 4. Time zone button. 5. Down button. 6. Alarm mode button. 7. Year button. 8. Date button. 9. Up button. 10. Time button 11. Alarm 2 button 12. Waveband switch. 2 46 810 1 3 5 7 12119 Controls 1416 18 13. Alarm indicator. 14. Tuning scale. 15. Day of week indicators. 16. Time/Date display. 17. Low battery indicator. 18. Tuning scale 19. Sleep button 20. On/off button. 13 15 17 20 19 If you need any further advice, please call our Technical Helpline on : 020 8758 0338 (Mon-Fri) Controls 21 23 22 21. Dimmer switch. 22. Volume control. 23. Tuning control. Switching 1. Place your clock on a flat surface. socket and switch 2. After a few seconds the Your clock radio is fitted with the factory set time, day and Your clock radio will automatically adjust for summer/winter time. See section on Backup battery Should the time require adjustment follow next section. Setting the time 1. Press and hold down the Time button. 2. Whilst holding down the Time Set button press the Up or Down buttons to set the time. Release the buttons when the correct time is reached. The clock uses a 12 hour display with an AM indicator. Ensure that the correct 12 hour cycle is selected. If you need any further advice, please call our Technical Helpline on : 020 8758 0338 (Mon-Fri) 1. To set year hold Year and Date The display will change to 2. Whilst holding down Year and Date buttons set correct year using Up or Down buttons. When the Year and Date buttons are released the display will revert to showing 1. To set date hold down the Date button. 2. Whilst holding down the Date button set correct date using Up or Down buttons. Setting alarm Your alarm clock alarms activate at different either the buzzer or Setting alarm 1 1. Press and hold down the 1 button. 2. Whilst holding down the 1 button press the Up or Down buttons to set the alarm time. Release the buttons alarm time is reached. The clock uses a 12 hour display AM indicator. Ensure that the correct 12 hour cycle is Setting alarm 2 1. Press and hold down the 2 button. 2. Whilst holding down the 2 button press the Up or Down buttons to set the alarm time. Release the buttons when the correct alarm time is reached. The clock uses a 12 hour display with an AM indicator. Ensure that the correct 12 hour cycle is selected. If you need any further advice, please call our Technical Helpline on : 020 8758 0338 (Mon-Fri) Day/month 1. Press and hold 2. Release the snooze Alarm modes Your clock radio has three alarm The alarm modes are Weekdays only - the alarm will switch Weekends only - the alarm will switch on Everyday - the alarm will switch on everyday. Weekday alarm 1. Press and hold down the 1 or 2 buttons (depending on which alarm you wish to set mode for) 2. Whilst holding down 1 or 2 buttons repeatedly press and release the Alarm mode button until Mon to Fri indicators are lit. Weekend alarm 1. Press and hold alarm you wish to 1 or 2 buttons (depending on ode for) 2. Whilst holding down 1 or 2 buttons repeatedly press and release the Alarm mode button until Sat and Sun indicators are lit. Everyday alarm 1. Press and hold down the 1 or 2 buttons (depending on which alarm you wish to set mode for) 2. Whilst holding down 1 or 2 buttons repeatedly press and release the Alarm mode button until all the days of the week indicators are lit. If you need any further advice, please call our Technical Helpline on : 020 8758 0338 (Mon-Fri) Checking 1. Press and hold 1 or 2 buttons. The display will change from normal will show days of the which alarm will activate. Alarm button to return to normal time Listening to the radio 1. Switch on the radio by pressing the On/Off button. Select the required waveband using the Waveband switch. 2. Tune in to the desired station using the Tuning control. Adjust volume using the Volume control. 3. The Wire aerial located on the rear of your clock radio is for FM reception. The wire should be fully extended and positioned for optimum reception. For MW (AM) reception there is a built in ferrite aerial. Rotate your clock radio to the position giving best reception. Setting the 1. Set the alarm Alarm 1 or Alarm switch to the “Buzz” position. Alarm indicator will light. 2. The buzzer alarm will To switch off the alarm until the next On/Off button. To turn off the alarms permanently set Alarm 1 or Alarm 2 switch to the 'Off' position. Setting the alarms to wake to radio 1. Set the alarm time as previously described. Set the Alarm 1 or Alarm 2 switch to the “Radio” position. The corresponding Alarm indicators will light. 2. Ensure that the volume is set to the correct level and the desired station is tuned in. 3. The radio alarm will sound every day at the preset time for 1 hour. To switch off the alarm until the next day press the On/Off button. To turn off the alarms permanently set the Alarm 1 or Alarm 2 switch to the “Off” position. If you need any further advice, please call our Technical Helpline on : 020 8758 0338 (Mon-Fri)...